#
# Test Data
#
# Format: Identifer, Type, Value
#                    S =>  Value is SSIString
#                    C =>  Value is Cardinal
#                    E =>  Existence (no value)
#                    A =>  Value is AbsoluteTime ("mm/dd/yyyy_hh:mm:ss" - may be <start> = start date/time of SSA simulator)
#                    I =>  Value is IPAddress
#                    T =>  Value is SwitchTime
#                    K =>  Value is KeypadSequence
#										 R =>  Value is Identifier
#										 M =>  Value is MACAddress

[sw]
# InternalModule	DS8
0.6.2, E				#	InternalModule	Existence		group represents a module slot on the base unit - any installed module is exactly one portgroup
0.6.2.1, C, 16	#	InternalModuleType	InternalModEnumeration	{Empty[1], ATM4[2], ATM4U[3], T1[4], DualT1[5], E1[6], DualE1[7], E1R2[8], DualE1R2[9], QuadBRI[10], J1[11], DualJ1[12], INDeX[13], DualBRI[14], POTPhones[15], DSPhones[16], VCM[17], Modem[18]}
0.6.2.2, C, 1		#	InternalSlotNumber	Cardinal	{1..4}	
0.6.2.3, C, 2		#	InternalCardType	CardTypeEnumeration	{Carrier[1], Base[2], Mezzanine[3]}	
0.6.2.4, C, 8		#	NumberOfChannels	Cardinal
0.6.2.5, C, 11	#	PCB version
0.6.2.6, C, 22	#	board version
0.6.8, E				# Extension Group
# InternalModule QuadBRI 4 Digital trunk lines
0.2.2, E				#	InternalModule	Existence		group represents a module slot on the base unit - any installed module is exactly one portgroup
0.2.2.1, C, 10	#	InternalModuleType	InternalModEnumeration	{Empty[1], ATM4[2], ATM4U[3], T1[4], DualT1[5], E1[6], DualE1[7], E1R2[8], DualE1R2[9], QuadBRI[10], J1[11], DualJ1[12], INDeX[13], DualBRI[14], POTPhones[15], DSPhones[16], VCM[17], Modem[18]}
0.2.2.2, C, 1		#	InternalSlotNumber	Cardinal	{1..4}	
0.2.2.3, C, 3		#	InternalCardType	CardTypeEnumeration	{Carrier[1], Base[2], Mezzanine[3]}	
0.2.2.4, C, 4		#	NumberOfChannels	Cardinal
0.2.2.5, C, 33	#	PCB version
0.2.2.6, C, 44	#	board version
0.2.7, E 				#	DigitalTrunkModule	group is n digital trunks
0.2.7.9, E 			#	DigitalTrunks	each digital trunk has multiple channels and is treated as one group
0.2.7.10, E 			#	DigitalTrunks	each digital trunk has multiple channels and is treated as one group
0.2.7.11, E 			#	DigitalTrunks	each digital trunk has multiple channels and is treated as one group
0.2.7.12, E 			#	DigitalTrunks	each digital trunk has multiple channels and is treated as one group
# InternalModule ATM4 4 analog trunk lines
0.1.2, E				#	InternalModule	Existence		group represents a module slot on the base unit - any installed module is exactly one portgroup
0.1.2.1, C, 2		#	InternalModuleType	InternalModEnumeration	{Empty[1], ATM4[2], ATM4U[3], T1[4], DualT1[5], E1[6], DualE1[7], E1R2[8], DualE1R2[9], QuadBRI[10], J1[11], DualJ1[12], INDeX[13], DualBRI[14], POTPhones[15], DSPhones[16], VCM[17], Modem[18]}
0.1.2.2, C, 2		#	InternalSlotNumber	Cardinal	{1..4}	
0.1.2.3, C, 3		#	InternalCardType	CardTypeEnumeration	{Carrier[1], Base[2], Mezzanine[3]}	
0.1.2.4, C, 4		#	NumberOfChannels	Cardinal
0.1.2.5, C, 55	#	PCB version
0.1.2.6, C, 66	#	board version
0.1.5, E 				#	AnalogueTrunkGroup (group is n analogue ports)
0.1.6, E 				#	TrunkGroup	group is n analogue ports or a VoIP trunk 
# InternalModule	POTS8
0.7.2, E				#	InternalModule	Existence		group represents a module slot on the base unit - any installed module is exactly one portgroup
0.7.2.1, C, 15	#	InternalModuleType	InternalModEnumeration	{Empty[1], ATM4[2], ATM4U[3], T1[4], DualT1[5], E1[6], DualE1[7], E1R2[8], DualE1R2[9], QuadBRI[10], J1[11], DualJ1[12], INDeX[13], DualBRI[14], POTPhones[15], DSPhones[16], VCM[17], Modem[18]}
0.7.2.2, C, 2		#	InternalSlotNumber	Cardinal	{1..4}	
0.7.2.3, C, 2		#	InternalCardType	CardTypeEnumeration	{Carrier[1], Base[2], Mezzanine[3]}	
0.7.2.4, C, 8		#	NumberOfChannels	Cardinal
0.7.2.5, C, 77	#	PCB version
0.7.2.6, C, 88	#	board version
0.7.8, E				# Extension Group
# InternalModule	VCM 32
0.8.2, E				#	InternalModule	Existence		group represents a module slot on the base unit - any installed module is exactly one portgroup
0.8.2.1, C, 17	#	InternalModuleType	InternalModEnumeration	{Empty[1], ATM4[2], ATM4U[3], T1[4], DualT1[5], E1[6], DualE1[7], E1R2[8], DualE1R2[9], QuadBRI[10], J1[11], DualJ1[12], INDeX[13], DualBRI[14], POTPhones[15], DSPhones[16], VCM[17], Modem[18]}
0.8.2.2, C, 3		#	InternalSlotNumber	Cardinal	{1..4}	
0.8.2.3, C, 2		#	InternalCardType	CardTypeEnumeration	{Carrier[1], Base[2], Mezzanine[3]}	
0.8.2.4, C, 32	#	NumberOfChannels	Cardinal
0.8.2.5, C, 98	#	PCB version
0.8.2.6, C, 99  #	board version
# ExpansionModule DS30V1 
0.3.0, E					#	ExpansionModule		Existence		
0.3.0.0, C, 1			#	ModuleNumber	Cardinal 	Range 1-12
0.3.0.1, E, 			#	LoadableModuleInfo	Existence		an expansion module is currently connected to this port
0.3.0.1.0, C, 1  	#	ModuleType 	ModuleTypeEnum	{DS30V1[1]}
0.3.0.1.1, C, 4  	#	FirmwareMajorVersion 	Cardinal 	Firmware versions are structured as MajorRelease.MinorRelease(BuildNumber)
0.3.0.1.2, C, 0  	#	FirmwareMinorVersion 	Cardinal
0.3.0.1.3, C, 99	#	FirmwareBuildVersion 	Cardinal
0.3.8, E					# Extension Group
# ExpansionModule DT30
0.4.0, E					#	ExpansionModule		Existence		
0.4.0.0, C, 2			#	ModuleNumber	Range 1-12
0.4.0.1, E, 			#	LoadableModuleInfo	Existence		an expansion module is currently connected to this port
0.4.0.1.0, C, 5  	#	ModuleType 	ModuleTypeEnum		{DT30[5]}
0.4.0.1.1, C, 4  	#	FirmwareMajorVersion 	Cardinal 	Firmware versions are structured as MajorRelease.MinorRelease(BuildNumber)
0.4.0.1.2, C, 0  	#	FirmwareMinorVersion 	Cardinal
0.4.0.1.3, C, 98 	#	FirmwareBuildVersion 	Cardinal
# WAN3Module
0.5.1, E								#	WAN3Module	Existence		
0.5.1.0, I, 143.1.10.16	#	Address		IPAddress		base unit is in contact with WAN3 
0.5.1.1, E, 						#	LoadableModuleInfo	Existence		base unit supports WAN3 module
0.5.1.1.1, C, 4  				#	FirmwareMajorVersion 	Firmware versions are structured as MajorRelease.MinorRelease(BuildNumber)
0.5.1.1.2, C, 0  				#	FirmwareMinorVersion 	Cardinal 
0.5.1.1.3, C, 97 				#	FirmwareBuildVersion 	Cardinal 
0.5.10, E								#	ModuleFailureInfo	Alarm is present, applies only to expansion modules; classified as a linkAlarm		
# VoipGroup H323Trunks
0.9.4, E							#	VoIpGroup	Existence	group is VoIP trunk or extension group
0.9.4.0, C, 4					#	IpGroupType Enumeration	IpGroupTypeEnum	{AvayaPhones[1], OpenH323Phones[2], DectPhones[3], H323Trunk[4], SIPTrunk[5]} 
0.9.4.1, I, 127.0.0.2	#	TrunkGatewayAddress	The IP address for the trunk, as configured using Manager
0.9.6, E 							#	TrunkGroup	group is n analogue ports or a VoIP trunk 
# VoipGroup SIPTrunks
0.10.4, E								#	VoIpGroup	Existence	group is VoIP trunk or extension group
0.10.4.0, C, 5					#	IpGroupType Enumeration	IpGroupTypeEnum	{AvayaPhones[1], OpenH323Phones[2], DectPhones[3], H323Trunk[4], SIPTrunk[5]} 
0.10.4.1, I, 127.0.0.3	#	TrunkGatewayAddress	IPAddress	group is a VoIP trunk or a group of DECT IP phones
0.10.4.2, S, DEV_LAN		#	DomainName	The domain name for the trunk, as configured using Manager
0.10.6, E 							#	TrunkGroup	group is n analogue ports or a VoIP trunk 
# VoipGroup AvayaPhones
0.11.4, E				#	VoIpGroup	Existence	group is VoIP trunk or extension group
0.11.4.0, C, 1	#	IpGroupType Enumeration	IpGroupTypeEnum	{AvayaPhones[1], OpenH323Phones[2], DectPhones[3], H323Trunk[4], SIPTrunk[5]} 
0.11.8, E				# Extension Group
# VoipGroup OpenH323Phones
0.12.4, E				#	VoIpGroup	Existence	group is VoIP trunk or extension group
0.12.4.0, C, 2	#	IpGroupType Enumeration	IpGroupTypeEnum	{AvayaPhones[1], OpenH323Phones[2], DectPhones[3], H323Trunk[4], SIPTrunk[5]} 
0.12.8, E				# Extension Group
# VoipGroup DECTEctensions
0.13.4, E				#	VoIpGroup	Existence	group is VoIP trunk or extension group
0.13.4.0, C, 3	#	IpGroupType Enumeration	IpGroupTypeEnum	{AvayaPhones[1], OpenH323Phones[2], DectPhones[3], H323Trunk[4], SIPTrunk[5]} 
0.13.4.1, I, 1.2.3.4	#	IP Address
0.13.8, E				# Extension Group
# Virtual Extensions
0.14.8, E				# Extension Group
0.14.9, E				# group is virtual extension group
# VoipGroup SESTrunks
0.15.4, E								#	VoIpGroup	Existence	group is VoIP trunk or extension group
0.15.4.0, C, 6					#	IpGroupType Enumeration	IpGroupTypeEnum	{AvayaPhones[1], OpenH323Phones[2], DectPhones[3], H323Trunk[4], SIPTrunk[5], SESTrunk[6]} 
0.15.4.1, I, 127.0.0.8	#	TrunkGatewayAddress	IPAddress	group is a VoIP trunk or a group of DECT IP phones
0.15.4.2, S, SES_LAN		#	DomainName	The domain name for the trunk, as configured using Manager
0.15.6, E 							#	TrunkGroup	group is n analogue ports or a VoIP trunk 
# Other Switch data
1, C, 44 								# TotalExtensions	Cardinal
2, C, 12 								# TotalTrunks	Cardinal
3.0, C, 27  						#	ModuleType 	ModuleTypeEnum		{SAMBA}
3.1, C, 4  							#	FirmwareMajorVersion 	Cardinal 	Firmware versions are structured as MajorRelease.MinorRelease(BuildNumber)
3.2, C, 0  							#	FirmwareMinorVersion 	Cardinal
3.3, C, 96 							#	FirmwareBuildVersion 	Cardinal
4, S, SSA-Simulator			#	SwitchName	String	As found in Manager's System settings	
5, I, 127.0.0.1					#	SwitchAddress	IPAddress	The Switch address on LAN1	
6, E										#	SystemInfo additional description of hardware configuration
7, A, <start>						#	StartTime	AbsoluteTime	Time when the switch started up	
8, T, 0									#	SwitchUpTime	SwitchTime	Monitoring the switch object produces a 1Hz time signal and also produces notifications of config merges  [SwitchTime is elapsed time since the start time of the switch, in milliseconds]
9, T, 0									#	SwitchUpTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
10, E																	#	List of all alarms currently held in switch
10.0.2, R, sw.0.1.6.14.9.0.9.0.0			#	TrunkChannelAlarm	Alarm is in the trunk category
10.1.2, R, sw.0.2.7.9.0.17.1.0				#	TrunkGroupAlarm	Alarm is in the trunk category
10.2.2, R, sw.0.2.7.9.0.14.1.0.9.0.0	#	TrunkChannelAlarm	Alarm is in the trunk category
10.3.2, R, sw.0.9.6.17.0.0						#	TrunkGroupAlarm	Alarm is in the trunk category
10.4.3, R, sw.0.5.10									#	LinkAlarm	Alarm is in the link category
10.5.1, R, sw.6.9.0.0									#	Object Congestion Alarm is in the service category
10.6.1, R, sw.6.7.0.0									#	Object Authentication Alarm is in the service category
10.7.1, R, sw.6.7.1.0									#	Object Authentication Alarm is in the service category
10.8.1, R, sw.6.7.2.0									#	Object Authentication Alarm is in the service category
10.9.1, R, sw.6.7.3.0									#	Object Authentication Alarm is in the service category
10.10.1, R, sw.6.7.4.0								#	Object Authentication Alarm is in the service category
10.11.1, R, sw.6.7.5.0								#	Object Authentication Alarm is in the service category
10.12.1, R, sw.6.7.6.0								#	Object Authentication Alarm is in the service category
10.13.1, R, sw.6.7.7.0								#	Object Authentication Alarm is in the service category
10.14.1, R, sw.6.7.8.0								#	Object Authentication Alarm is in the service category
10.15.1, R, sw.6.0.1.4 								# Object Resource Alarm is in the service category
10.16.1, R, sw.6.0.2.4 								# Object Resource Alarm is in the service category
10.17.1, R, sw.6.0.3.4 								# Object Resource Alarm is in the service category
10.18.1, R, sw.6.0.4.4 								# Object Resource Alarm is in the service category
10.19.1, R, sw.6.0.5.4 								# Object Resource Alarm is in the service category
10.20.2, R, sw.0.2.7.9.0.18 					# LoopbackAlarm Alarm is in the trunk category
#10.21.2, R, sw.0.1.6.18 							# LoopbackAlarm Alarm is in the trunk category
10.22.2, R, sw.0.9.6.18 							# LoopbackAlarm Alarm is in the trunk category
10.23.3, R, sw.14.3 							# Feature Key Connection Failure Alarm is in the service category
10.24.2, R, sw.0.1.6.14.10.0.9.0.0			#	TrunkChannelAlarm	Alarm is in the trunk category
10.25.1, R, sw.14.5.1.3 							# Licence oversubscribed Alarm is in the service category
10.26.1, R, sw.14.6.0.0 							# Licence unavailable Alarm is in the service category
10.27.3, R, sw.16.5                   # Voicemail Storage Alarm is in the link category
10.28.3, R, sw.16.6                   # Voicemail UpDown Alarm is in the link category
10.29.3, R, sw.0.6.8.1.1.4            # Device Change Alarm is in the link category
10.30.2, R, sw.0.2.7.9.0.17.2.0				#	TrunkGroupAlarm	Alarm is in the trunk category
10.31.0, R, sw.15.5										# Config Alarm DuplicateEntries
10.32.0, R, sw.0.2.7.9.0.14.1.0.9.1.0	#	TrunkChannelAlarm	Alarm is in the config category
10.33.0, R, sw.0.1.6.14.10.0.9.1.0  	#	TrunkChannelAlarm	Alarm is in the trunk category
10.36.2, R, sw.0.2.7.9.0.17.3.0				#	TrunkGroupAlarm	Alarm is in the trunk category
10.37.0, R, sw.6.10		# Config Alarm LostAlarm
10.38.0, R, sw.6.35		# Config Alarm ClockSourceAlarm
11, E		#	DataInterfaces	InterfaceTableLink		
12, E		#	DataRoutes	RoutingTableLink		
13,	E		#	VPNInfo	VPNInfoLink		
14, E		#	LicenceInfo	LicenceInfoLink		
15, E		#	DirectoryInfo	DirectoryLink		
16, E										# VoucemailInfo Link
17, C, 1 								# TerritoryVariant	TerritoryVariantEnum {ROW[1], US[2]} - indicates the flag set up during manufacture, not the locale setting
18, E										# Manager Access History
23, E										# PingResults
25, C, 3 								# LastRestartReason	RestartReasonEnum {UserInitiated[1], NewConfiguration[2], AbnormalTermination[3], NormalPowerup[4]}
26, S, Manager-0815			#	RestartedBy	Manager access ID used when commanding the restart (LastRestartReason = UserInitiated or NewConfiguration)
27, S, 0123456789ABCDEF	#	StackDump	Textual form of the crash stack dump (LastRestartReason = AbnormalTermination)
28, E	 									#	WAN3Supported	Existence	WAN3 module is supported
30, E
#31, E

[sw.0.1.6]
# Analog Trunk Group
14, E 	#	ChannelInfoList
14.9, E 	#	ChannelInfoEntry
14.10, E 	#	ChannelInfoEntry
14.11, E 	#	ChannelInfoEntry
14.12, E 	#	ChannelInfoEntry
#18, 	E		# LoopbackAlarm 
[sw.0.1.6.14.9.0]
# TrunkChannnel
0, C, 1						#	TrunkNumber	Line number as used internally by IP Office (trunk is analogue trunk)
5, R, sw.19.0.1.0	#	ActiveCall	CallRef
6, C, 1						# ChannelState IdleChannelStateEnum {Normal[1], Clearing[2], OutOfService[3], BusyWrapUp[4], ConnectedWAN[5], Prealerting[6], listeningToBusy[7], listeningToDisconnected[8], listeningToNU[9]}
8, E							# CallsByCategory Breakdown of TotalCalls/TotalCallTime
9, E							# AlarmList 
9.0, E						# AlarmInfo
9.0.0, E					# TrunkChannelAlarm
[sw.0.1.6.14.10.0]
# TrunkChannnel
0, C, 2						#	TrunkNumber	Line number as used internally by IP Office (trunk is analogue trunk)
5, R, sw.19.0.2.0	#	ActiveCall	CallRef
6, C, 1						# ChannelState IdleChannelStateEnum {Normal[1], Clearing[2], OutOfService[3], BusyWrapUp[4], ConnectedWAN[5], Prealerting[6], listeningToBusy[7], listeningToDisconnected[8], listeningToNU[9]}
8, E							# CallsByCategory Breakdown of TotalCalls/TotalCallTime
9, E							# AlarmList 
9.0, E						# AlarmInfo
9.0.0, E					# TrunkChannelAlarm
9.1.0, E					# TrunkChannelAlarm
[sw.0.1.6.14.11.0]
# TrunkChannnel
0, C, 3		#	TrunkNumber	Line number as used internally by IP Office (trunk is analogue trunk)
6, C, 1		# ChannelState IdleChannelStateEnum {Normal[1], Clearing[2], OutOfService[3], BusyWrapUp[4], ConnectedWAN[5], Prealerting[6], listeningToBusy[7], listeningToDisconnected[8], listeningToNU[9]}
8, E			# CallsByCategory Breakdown of TotalCalls/TotalCallTime
[sw.0.1.6.14.12.0]
# TrunkChannnel
0, C, 4		#	TrunkNumber	Line number as used internally by IP Office (trunk is analogue trunk)
5, R, sw.19.0.15.0	#	ActiveCall	CallRef
6, C, 1		# ChannelState IdleChannelStateEnum {Normal[1], Clearing[2], OutOfService[3], BusyWrapUp[4], ConnectedWAN[5], Prealerting[6], listeningToBusy[7], listeningToDisconnected[8], listeningToNU[9]}
8, E			# CallsByCategory Breakdown of TotalCalls/TotalCallTime
[sw.0.1.6.14.9.0.9.0.0]
# TrunkChannnelAlarm
0, E					#	GenericInfo Existence
0.0, T, 0			#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 1000	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E				#	Current	Existence Alarm condition is still present
0.3, E				#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, C, 2				#	AlarmType	TrunkChannelAlarmType Enumeration {SiezeFailure[1], IncomingCallOutgoingTrunk[2], CLINotDelivered[3], DDIIncomplete[4],  NoRoute[5], RouteToNoVM[6]}
[sw.0.1.6.14.10.0.9.0.0]
# TrunkChannnelAlarm
0, E					#	GenericInfo Existence
0.0, T, 0			#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 10		#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.3, E				#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, C, 3				#	AlarmType	TrunkChannelAlarmType Enumeration {SiezeFailure[1], IncomingCallOutgoingTrunk[2], CLINotDelivered[3], DDIIncomplete[4],  NoRoute[5], RouteToNoVM[6]}
[sw.0.1.6.14.10.0.9.1.0]
# TrunkChannnelAlarm
0, E					#	GenericInfo Existence
0.0, T, 0			#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 10		#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.3, E				#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, C, 5				#	AlarmType	TrunkChannelAlarmType Enumeration {SiezeFailure[1], IncomingCallOutgoingTrunk[2], CLINotDelivered[3], DDIIncomplete[4],  NoRoute[5], RouteToNoVM[6]}
3, C, 11
5, K, 12345
[sw.0.1.6.18]
# LoopbackAlarm
#0, E				#	GenericInfo Existence
#0.0, T, 0		#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
#0.1, C, 5		#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
#0.3, E			#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
#1, E				#	LoopbacksPresent Existence
#1.1, E			#	LoopbackPresent Existence
#1.1.0, C, 4	#	LoopbackType LoopbackType Enumeration {NearEndPayload[1], NearEndLine[2], NearEndInward[3], NearEndOther[4], FarEndPayload[5], FarEndLine[6]}
#1.2.0, C, 5	#	LoopbackType LoopbackType Enumeration {NearEndPayload[1], NearEndLine[2], NearEndInward[3], NearEndOther[4], FarEndPayload[5], FarEndLine[6]}
#1.3.0, C, 6	#	LoopbackType LoopbackType Enumeration {NearEndPayload[1], NearEndLine[2], NearEndInward[3], NearEndOther[4], FarEndPayload[5], FarEndLine[6]}

[sw.0.2.7.9.0]
# Digital Trunk Group
0, C, 5		#	TrunkNumber Line number as used internally by IP Office (trunk is digital or VoIP trunk)	
1, C, 1		#	CircuitType DigitalTrunkType Enumeration {E1[1], E1R2[2], E1R2Q931[3], T1CAS[4], T1Q931[5], T1PRI[6], J1[7], BRI[8]}
2, C, 5   # CCSProtocolType = ETSI CHI
13, E			#	ExchangeHeldCallList
14, E			#	ChannelInfoList
14.1, E		#	ChannelInfoEntry
14.2, E		#	ChannelInfoEntry
15, E			# CallsByCategory Breakdown of TotalCalls/TotalCallTime
16, E			# TrunkStatsTableLink trunk is ETSI digital trunk
17, E			# AlarmList 
17.0, E		# AlarmInfo
17.1.0, E	# TrunkGroupAlarm
17.2.0, E	# TrunkGroupAlarm
17.3.0, E	# TrunkGroupAlarm
18, E			# LoopbackAlarm 
[sw.0.2.7.9.0.14.1.0]
# TrunkChannnel
1, C, 1						#	AppearanceID Line Appearance reference for this channel	(trunk is digital or analogue trunk and has Appearance Id configured)
3, C, 1						#	R2SignallingType R2SignallingEnumeration {Loopstart[1], DID[2], DIOD[3], TieImmed[4],TieAuto[5], TieWink[6], TieDelay[7], WAN[8], OutOfService[9]}
5, R, sw.19.0.1.0	#	ActiveCall	CallRef
6, C, 1						# ChannelState IdleChannelStateEnum {Normal[1], Clearing[2], OutOfService[3], BusyWrapUp[4], ConnectedWAN[5], Prealerting[6], listeningToBusy[7], listeningToDisconnected[8], listeningToNU[9]}
9, E							# AlarmList 
9.0, E						# AlarmInfo
9.0.0, E					# TrunkChannelAlarm
9.1.0, E					# TrunkChannelAlarm
[sw.0.2.7.9.0.14.1.0.9.0.0]
# TrunkChannnelAlarm
0, E				#	GenericInfo Existence
0.0, T, 0		#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 1		#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E			#	Current	Existence Alarm condition is still present
0.3, E			#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, C, 4			#	AlarmType	TrunkChannelAlarmType Enumeration {SiezeFailure[1], IncomingCallOutgoingTrunk[2], CLINotDelivered[3], DDIIncomplete[4],  NoRoute[5], RouteToNoVM[6]}
2, C, 1			#	DDIDigitsRequired	Cardinal AlarmType=DDIIncomplete
5, K, 1234	#	DDI	KeypadSequence	DDI presented from trunk
[sw.0.2.7.9.0.14.1.0.9.1.0]
# TrunkChannnelAlarm
0, E				#	GenericInfo Existence
0.0, T, 0		#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 1		#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.3, E			#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, C, 6			#	AlarmType	TrunkChannelAlarmType Enumeration {SiezeFailure[1], IncomingCallOutgoingTrunk[2], CLINotDelivered[3], DDIIncomplete[4],  NoRoute[5], RouteToNoVM[6]}
3, C, 5
4, S, Text1
[sw.0.2.7.9.0.14.2.0]
# TrunkChannnel
1, C, 2						#	AppearanceID Line Appearance reference for this channel	(trunk is digital or analogue trunk and has Appearance Id configured)
3, C, 2						#	R2SignallingType R2SignallingEnumeration {Loopstart[1], DID[2], DIOD[3], TieImmed[4],TieAuto[5], TieWink[6], TieDelay[7], WAN[8], OutOfService[9]}
5, R, sw.19.0.2.0	#	ActiveCall	CallRef
6, C, 1						# ChannelState IdleChannelStateEnum {Normal[1], Clearing[2], OutOfService[3], BusyWrapUp[4], ConnectedWAN[5], Prealerting[6], listeningToBusy[7], listeningToDisconnected[8], listeningToNU[9]}
[sw.0.2.7.9.0.15]
#CallsByCategory
0, E 						#	CallCountsInCategoriesList
0.1, E 					#	CallCountsInCategoriesEntry
0.1.0, C, 1			#	Category	CallCategoryEnumeration	{Outgoing[1], IncomingAnswered[2], IncomingAbandoned[3]}
0.1.1, C, 5			#	TotalCalls	Cardinal	total calls in category
0.1.2, C, 2000	#	TotalCallTime	ElapsedTimeInSeconds	total time on all these calls
0.2.0, C, 2			#	Category	CallCategoryEnumeration	{Outgoing[1], IncomingAnswered[2], IncomingAbandoned[3]}
0.2.1, C, 10		#	TotalCalls	Cardinal	total calls in category
0.2.2, C, 1000	#	TotalCallTime	ElapsedTimeInSeconds	total time on all these calls
0.2.3, C, 30		#	TotalRingTime	ElapsedTimeInSeconds	total ringing time on all these calls
0.3.0, C, 3			#	Category	CallCategoryEnumeration	{Outgoing[1], IncomingAnswered[2], IncomingAbandoned[3]}
0.3.1, C, 3			#	TotalCalls	Cardinal	total calls in category
0.3.3, C, 40		#	TotalRingTime	ElapsedTimeInSeconds	total ringing time on all these calls
1, T, 2000			#	CountStartTime	SwitchTime	time when all counts were initialised to zero
2, E #	Command	Reset counts command is possible
[sw.0.2.7.9.0.16]
#TrunkStatsTable table contains x rows arranged as a circular buffer, with the start of the buffer marked by oldestRow - the rows are to be interpreted in order oldestRow..x, then [oldestRow!=1] 1..oldestRow-1. x is initially 1 when trunk is discovered. It increases every rowCreationInterval seconds up to a core-defined maximum [96]
0, C, 900			#	RowCreationInterval	ElapsedTimeInSeconds	total ringing time on all these calls
1, C, 1				#	OldestRow	Initially = 1. Once x is at maximum, this field is updated every rowCreationInterval 
2, T, 0				#	LastRowCreationTime	SwitchTime	the most recently created row refers to period from lastRowCreationTime to the present
3, E					#	ErrorRows List
3.1, E		  	#	ErrorRow Key values run from 1 to x
3.1.0, C, 0		# LossOfFrameAlignment	Number of occurrences during interval	 trunk type is E1/E1R2 and value is non-zero
3.1.1, C, 1		# FramingErrorReceived	Number of occurrences during interval	 trunk type is E1/E1R2 and value is non-zero
3.1.2, C, 2		# CRCErrorReceived	Number of occurrences during interval	 trunk type is E1/E1R2 and value is non-zero
3.1.3, C, 3		# AlarmIndicationSignal	Number of occurrences during interval	 trunk type is E1/E1R2 and value is non-zero
3.1.4, C, 4		# LossOfSignal	Number of occurrences during interval	 trunk type is E1/E1R2 and value is non-zero
3.1.5, C, 5		# CodeViolationError	Number of occurrences during interval	 trunk type is E1/E1R2 and value is non-zero
3.1.6, C, 6		# ReceiveAndTransmitSlips	Number of occurrences during interval	 trunk type is E1/E1R2 and value is non-zero
3.1.7, C, 7		# EBitError	Number of occurrences during interval	 trunk type is E1 and value is non-zero
3.1.8, C, 8		# ErroredSecond	Number of occurrences during interval	 trunk type is T1/J1 and value is non-zero
3.1.9, C, 9		# BurstyErroredSecond	Number of occurrences during interval	 trunk type is T1/J1 and value is non-zero
3.1.10, C, 10	# SeverelyErroredSecond	Number of occurrences during interval	 trunk type is T1/J1 and value is non-zero
3.1.11, C, 11	# FailedUnavailableSecond	Number of occurrences during interval	 trunk type is T1/J1 and value is non-zero
3.1.12, C, 12	# BipolarViolation	Number of occurrences during interval	 trunk type is T1/J1 and value is non-zero
3.1.13, C, 13	# ClockSlip	Number of occurrences during interval	 trunk type is T1/J1 and value is non-zero
3.1.14, C, 14	# MissedFrame	Number of occurrences during interval	 trunk type is T1/J1 and value is non-zero
3.2, E		  	#	ErrorRow Key values run from 1 to x
3.2.0, C, 21	# LossOfFrameAlignment	Number of occurrences during interval	 trunk type is E1/E1R2 and value is non-zero
3.2.1, C, 22	# FramingErrorReceived	Number of occurrences during interval	 trunk type is E1/E1R2 and value is non-zero
3.2.2, C, 23	# CRCErrorReceived	Number of occurrences during interval	 trunk type is E1/E1R2 and value is non-zero
3.2.3, C, 24	# AlarmIndicationSignal	Number of occurrences during interval	 trunk type is E1/E1R2 and value is non-zero
3.2.4, C, 25	# LossOfSignal	Number of occurrences during interval	 trunk type is E1/E1R2 and value is non-zero
3.2.5, C, 26	# CodeViolationError	Number of occurrences during interval	 trunk type is E1/E1R2 and value is non-zero
3.2.6, C, 27	# ReceiveAndTransmitSlips	Number of occurrences during interval	 trunk type is E1/E1R2 and value is non-zero
3.2.7, C, 28	# EBitError	Number of occurrences during interval	 trunk type is E1 and value is non-zero
3.2.8, C, 29	# ErroredSecond	Number of occurrences during interval	 trunk type is T1/J1 and value is non-zero
3.2.9, C, 30	# BurstyErroredSecond	Number of occurrences during interval	 trunk type is T1/J1 and value is non-zero
3.2.10, C, 31	# SeverelyErroredSecond	Number of occurrences during interval	 trunk type is T1/J1 and value is non-zero
3.2.11, C, 32	# FailedUnavailableSecond	Number of occurrences during interval	 trunk type is T1/J1 and value is non-zero
3.2.12, C, 33	# BipolarViolation	Number of occurrences during interval	 trunk type is T1/J1 and value is non-zero
3.2.13, C, 34	# ClockSlip	Number of occurrences during interval	 trunk type is T1/J1 and value is non-zero
3.2.14, C, 35	# MissedFrame	Number of occurrences during interval	 trunk type is T1/J1 and value is non-zero
3.3, E		  	#	ErrorRow Key values run from 1 to x
3.3.0, C, 40	# LossOfFrameAlignment	Number of occurrences during interval	 trunk type is E1/E1R2 and value is non-zero
3.3.1, C, 41	# FramingErrorReceived	Number of occurrences during interval	 trunk type is E1/E1R2 and value is non-zero
3.3.2, C, 42	# CRCErrorReceived	Number of occurrences during interval	 trunk type is E1/E1R2 and value is non-zero
3.3.3, C, 43	# AlarmIndicationSignal	Number of occurrences during interval	 trunk type is E1/E1R2 and value is non-zero
3.3.4, C, 44	# LossOfSignal	Number of occurrences during interval	 trunk type is E1/E1R2 and value is non-zero
3.3.5, C, 45	# CodeViolationError	Number of occurrences during interval	 trunk type is E1/E1R2 and value is non-zero
3.3.6, C, 46	# ReceiveAndTransmitSlips	Number of occurrences during interval	 trunk type is E1/E1R2 and value is non-zero
3.3.7, C, 47	# EBitError	Number of occurrences during interval	 trunk type is E1 and value is non-zero
3.3.8, C, 48	# ErroredSecond	Number of occurrences during interval	 trunk type is T1/J1 and value is non-zero
3.3.9, C, 49	# BurstyErroredSecond	Number of occurrences during interval	 trunk type is T1/J1 and value is non-zero
3.3.10, C, 50	# SeverelyErroredSecond	Number of occurrences during interval	 trunk type is T1/J1 and value is non-zero
3.3.11, C, 51	# FailedUnavailableSecond	Number of occurrences during interval	 trunk type is T1/J1 and value is non-zero
3.3.12, C, 52	# BipolarViolation	Number of occurrences during interval	 trunk type is T1/J1 and value is non-zero
3.3.13, C, 53	# ClockSlip	Number of occurrences during interval	 trunk type is T1/J1 and value is non-zero
3.3.14, C, 54	# MissedFrame	Number of occurrences during interval	 trunk type is T1/J1 and value is non-zero
3.4, E		  	#	ErrorRow Key values run from 1 to x
3.4.0, C, 60	# LossOfFrameAlignment	Number of occurrences during interval	 trunk type is E1/E1R2 and value is non-zero
3.5, E		  	#	ErrorRow Key values run from 1 to x
3.5.1, C, 81	# FramingErrorReceived	Number of occurrences during interval	 trunk type is E1/E1R2 and value is non-zero
[sw.0.2.7.9.0.17.1.0]
# TrunkGroupAlarm
0, E			#	GenericInfo Existence
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 2	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, C, 1		#	AlarmType	TrunkGroupAlarmType Enumeration {LOS [1], OOS[2], RedAlarm[3], BlueAlarm[4], YellowAlarm[5], IPConnectFail[6]}
[sw.0.2.7.9.0.17.2.0]
# TrunkGroupAlarm
0, E			#	GenericInfo Existence
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 2	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, C, 2		#	AlarmType	TrunkGroupAlarmType Enumeration {LOS [1], OOS[2], RedAlarm[3], BlueAlarm[4], YellowAlarm[5], IPConnectFail[6]}
[sw.0.2.7.9.0.17.3.0]
# TrunkGroupAlarm
0, E			#	GenericInfo Existence
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 3	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, C, 7		#	AlarmType	TrunkGroupAlarmType Enumeration {LOS [1], OOS[2], RedAlarm[3], BlueAlarm[4], YellowAlarm[5], IPConnectFail[6]}
[sw.0.2.7.9.0.18]
# LoopbackAlarm
0, E				#	GenericInfo Existence
0.0, T, 0		#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 5		#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E			#	Current	Existence Alarm condition is still present
0.3, E			#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, E				#	LoopbacksPresent Existence
1.1, E			#	LoopbackPresent Existence
1.1.0, C, 1	#	LoopbackType LoopbackType Enumeration {NearEndPayload[1], NearEndLine[2], NearEndInward[3], NearEndOther[4], FarEndPayload[5], FarEndLine[6]}
1.2.0, C, 2	#	LoopbackType LoopbackType Enumeration {NearEndPayload[1], NearEndLine[2], NearEndInward[3], NearEndOther[4], FarEndPayload[5], FarEndLine[6]}
1.3.0, C, 3	#	LoopbackType LoopbackType Enumeration {NearEndPayload[1], NearEndLine[2], NearEndInward[3], NearEndOther[4], FarEndPayload[5], FarEndLine[6]}

[sw.0.2.7.10.0]
# Digital Trunk Group
0, C, 6	#	TrunkNumber Line number as used internally by IP Office (trunk is digital or VoIP trunk)	
1, C, 1		#	CircuitType DigitalTrunkType Enumeration {E1[1], E1R2[2], E1R2Q931[3], T1CAS[4], T1Q931[5], T1PRI[6], J1[7], BRI[8]}
14, E		#	ChannelInfoList
14.1, E	#	ChannelInfoEntry
14.2, E	#	ChannelInfoEntry
14.3, E	#	ChannelInfoEntry
15, E		# CallsByCategory Breakdown of TotalCalls/TotalCallTime
[sw.0.2.7.10.0.14.1.0]
# TrunkChannnel
1, C, 3	#	AppearanceID Line Appearance reference for this channel	(trunk is digital or analogue trunk and has Appearance Id configured)
3, C, 3	#	R2SignallingType R2SignallingEnumeration {Loopstart[1], DID[2], DIOD[3], TieImmed[4],TieAuto[5], TieWink[6], TieDelay[7], WAN[8], OutOfService[9]}
5, R, sw.19.0.16.0
[sw.0.2.7.10.0.14.2.0]
# TrunkChannnel
1, C, 4	#	AppearanceID Line Appearance reference for this channel	(trunk is digital or analogue trunk and has Appearance Id configured)
3, C, 4	#	R2SignallingType R2SignallingEnumeration {Loopstart[1], DID[2], DIOD[3], TieImmed[4],TieAuto[5], TieWink[6], TieDelay[7], WAN[8], OutOfService[9]}
6, C, 1	# ChannelState IdleChannelStateEnum {Normal[1], Clearing[2], OutOfService[3], BusyWrapUp[4], ConnectedWAN[5], Prealerting[6], listeningToBusy[7], listeningToDisconnected[8], listeningToNU[9]}
[sw.0.2.7.10.0.14.3.0]
# TrunkChannnel
1, C, 5	#	AppearanceID Line Appearance reference for this channel	(trunk is digital or analogue trunk and has Appearance Id configured)
3, C, 5	#	R2SignallingType R2SignallingEnumeration {Loopstart[1], DID[2], DIOD[3], TieImmed[4],TieAuto[5], TieWink[6], TieDelay[7], WAN[8], OutOfService[9]}
5, R, sw.19.0.23.0	
[sw.0.2.7.10.0.15]
#CallsByCategory
0, E 						#	CallCountsInCategoriesList
0.1, E 					#	CallCountsInCategoriesEntry
0.1.0, C, 1			#	Category	CallCategoryEnumeration	{Outgoing[1], IncomingAnswered[2], IncomingAbandoned[3]}
0.1.1, C, 5			#	TotalCalls	Cardinal	total calls in category
0.1.2, C, 2000	#	TotalCallTime	ElapsedTimeInSeconds	total time on all these calls
0.2.0, C, 2			#	Category	CallCategoryEnumeration	{Outgoing[1], IncomingAnswered[2], IncomingAbandoned[3]}
0.2.1, C, 10		#	TotalCalls	Cardinal	total calls in category
0.2.2, C, 1000	#	TotalCallTime	ElapsedTimeInSeconds	total time on all these calls
0.2.3, C, 30		#	TotalRingTime	ElapsedTimeInSeconds	total ringing time on all these calls
0.3.0, C, 3			#	Category	CallCategoryEnumeration	{Outgoing[1], IncomingAnswered[2], IncomingAbandoned[3]}
0.3.1, C, 3			#	TotalCalls	Cardinal	total calls in category
0.3.3, C, 40		#	TotalRingTime	ElapsedTimeInSeconds	total ringing time on all these calls
1, T, 2000			#	CountStartTime	SwitchTime	time when all counts were initialised to zero
2, E 						#	Command	Reset counts command is possible

[sw.0.2.7.11.0]
# Digital Trunk Group
0, C, 7	#	TrunkNumber Line number as used internally by IP Office (trunk is digital or VoIP trunk)	
1, C, 1		#	CircuitType DigitalTrunkType Enumeration {E1[1], E1R2[2], E1R2Q931[3], T1CAS[4], T1Q931[5], T1PRI[6], J1[7], BRI[8]}
2, C, 1		# CCS protocol type 
14, E		#	ChannelInfoList
14.1, E	#	ChannelInfoEntry
14.2, E	#	ChannelInfoEntry
15, E		# CallsByCategory Breakdown of TotalCalls/TotalCallTime
21, C, 1	# Disabled - Unlicensed

[sw.0.2.7.11.0.14.1.0]
# TrunkChannnel
1, C, 5	#	AppearanceID Line Appearance reference for this channel	(trunk is digital or analogue trunk and has Appearance Id configured)
4, C, 1	#	ServiceType AT&TService Enumeration {CallByCall[1], SDN[2], MegacomWats[3], Megacom800[4], Wats[5], Accunet[6], PrivateLine[7], Multiquest[8], ETN[9], I800[10], ILDS[11]}
6, C, 1	# ChannelState IdleChannelStateEnum {Normal[1], Clearing[2], OutOfService[3], BusyWrapUp[4], ConnectedWAN[5], Prealerting[6], listeningToBusy[7], listeningToDisconnected[8], listeningToNU[9]}
[sw.0.2.7.11.0.14.2.0]
# TrunkChannnel
1, C, 6	#	AppearanceID Line Appearance reference for this channel	(trunk is digital or analogue trunk and has Appearance Id configured)
4, C, 2	#	ServiceType AT&TService Enumeration {CallByCall[1], SDN[2], MegacomWats[3], Megacom800[4], Wats[5], Accunet[6], PrivateLine[7], Multiquest[8], ETN[9], I800[10], ILDS[11]}
6, C, 1	# ChannelState IdleChannelStateEnum {Normal[1], Clearing[2], OutOfService[3], BusyWrapUp[4], ConnectedWAN[5], Prealerting[6], listeningToBusy[7], listeningToDisconnected[8], listeningToNU[9]}
[sw.0.2.7.11.0.15]
#CallsByCategory
0, E 						#	CallCountsInCategoriesList
0.1, E 					#	CallCountsInCategoriesEntry
0.1.0, C, 1			#	Category	CallCategoryEnumeration	{Outgoing[1], IncomingAnswered[2], IncomingAbandoned[3]}
0.1.1, C, 5			#	TotalCalls	Cardinal	total calls in category
0.1.2, C, 2000	#	TotalCallTime	ElapsedTimeInSeconds	total time on all these calls
0.2.0, C, 2			#	Category	CallCategoryEnumeration	{Outgoing[1], IncomingAnswered[2], IncomingAbandoned[3]}
0.2.1, C, 10		#	TotalCalls	Cardinal	total calls in category
0.2.2, C, 1000	#	TotalCallTime	ElapsedTimeInSeconds	total time on all these calls
0.2.3, C, 30		#	TotalRingTime	ElapsedTimeInSeconds	total ringing time on all these calls
0.3.0, C, 3			#	Category	CallCategoryEnumeration	{Outgoing[1], IncomingAnswered[2], IncomingAbandoned[3]}
0.3.1, C, 3			#	TotalCalls	Cardinal	total calls in category
0.3.3, C, 40		#	TotalRingTime	ElapsedTimeInSeconds	total ringing time on all these calls
1, T, 2000			#	CountStartTime	SwitchTime	time when all counts were initialised to zero
2, E 						#	Command	Reset counts command is possible

[sw.0.2.7.12.0]
# Digital Trunk Group
0, C, 8	#	TrunkNumber Line number as used internally by IP Office (trunk is digital or VoIP trunk)	
1, C, 1		#	CircuitType DigitalTrunkType Enumeration {E1[1], E1R2[2], E1R2Q931[3], T1CAS[4], T1Q931[5], T1PRI[6], J1[7], BRI[8]}
14, E		#	ChannelInfoList
14.1, E	#	ChannelInfoEntry
14.2, E	#	ChannelInfoEntry
15, E		# CallsByCategory Breakdown of TotalCalls/TotalCallTime
[sw.0.2.7.12.0.14.1.0]
# TrunkChannnel
1, C, 7	#	AppearanceID Line Appearance reference for this channel	(trunk is digital or analogue trunk and has Appearance Id configured)
4, C, 3	#	ServiceType AT&TService Enumeration {CallByCall[1], SDN[2], MegacomWats[3], Megacom800[4], Wats[5], Accunet[6], PrivateLine[7], Multiquest[8], ETN[9], I800[10], ILDS[11]}
6, C, 1	# ChannelState IdleChannelStateEnum {Normal[1], Clearing[2], OutOfService[3], BusyWrapUp[4], ConnectedWAN[5], Prealerting[6], listeningToBusy[7], listeningToDisconnected[8], listeningToNU[9]}
[sw.0.2.7.12.0.14.2.0]
# TrunkChannnel
1, C, 8	#	AppearanceID Line Appearance reference for this channel	(trunk is digital or analogue trunk and has Appearance Id configured)
4, C, 4	#	ServiceType AT&TService Enumeration {CallByCall[1], SDN[2], MegacomWats[3], Megacom800[4], Wats[5], Accunet[6], PrivateLine[7], Multiquest[8], ETN[9], I800[10], ILDS[11]}
6, C, 1	# ChannelState IdleChannelStateEnum {Normal[1], Clearing[2], OutOfService[3], BusyWrapUp[4], ConnectedWAN[5], Prealerting[6], listeningToBusy[7], listeningToDisconnected[8], listeningToNU[9]}
[sw.0.2.7.12.0.15]
#CallsByCategory
0, E 						#	CallCountsInCategoriesList
0.1, E 					#	CallCountsInCategoriesEntry
0.1.0, C, 1			#	Category	CallCategoryEnumeration	{Outgoing[1], IncomingAnswered[2], IncomingAbandoned[3]}
0.1.1, C, 5			#	TotalCalls	Cardinal	total calls in category
0.1.2, C, 2000	#	TotalCallTime	ElapsedTimeInSeconds	total time on all these calls
0.2.0, C, 2			#	Category	CallCategoryEnumeration	{Outgoing[1], IncomingAnswered[2], IncomingAbandoned[3]}
0.2.1, C, 10		#	TotalCalls	Cardinal	total calls in category
0.2.2, C, 1000	#	TotalCallTime	ElapsedTimeInSeconds	total time on all these calls
0.2.3, C, 30		#	TotalRingTime	ElapsedTimeInSeconds	total ringing time on all these calls
0.3.0, C, 3			#	Category	CallCategoryEnumeration	{Outgoing[1], IncomingAnswered[2], IncomingAbandoned[3]}
0.3.1, C, 3			#	TotalCalls	Cardinal	total calls in category
0.3.3, C, 40		#	TotalRingTime	ElapsedTimeInSeconds	total ringing time on all these calls
1, T, 2000			#	CountStartTime	SwitchTime	time when all counts were initialised to zero
2, E 						#	Command	Reset counts command is possible
[sw.0.5.10]
# UpdownHistory
0, E				#	Initialising Existence
1, E				#	DownAlarm Existence
1.0, E			#	GenericInfo Existence
1.0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
1.0.1, C, 3	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
1.0.2, E		#	Current	Existence Alarm condition is still present
1.0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null

[sw.0.8.6]
# Analog Trunk Group
14, E 		#	ChannelInfoList
14.1, E 	#	ChannelInfoEntry
14.2, E 	#	ChannelInfoEntry
[sw.0.8.6.14.1.0]
# TrunkChannnel
0, C, 9			#	TrunkNumber	Line number as used internally by IP Office (trunk is analogue trunk)
2, C, 1			#	AnalogueSignallingType	AlogSignalling Enum {Loopstart[1], LoopstartCLI[2], Groundstart[3], E&Mtie[4], E&MDID[5], E&MSw56[6], Did[7], Clear64[8], OutOfService[9]}
4, C, 1			#	ServiceType	AT&TService Enumeration {CallByCall[1], SDN[2], MegacomWats[3], Megacom800[4], Wats[5], Accunet[6], PrivateLine[7], Multiquest[8], ETN[9], I800[10], ILDS[11]}
6, C, 1			# ChannelState IdleChannelStateEnum {Normal[1], Clearing[2], OutOfService[3], BusyWrapUp[4], ConnectedWAN[5], Prealerting[6], listeningToBusy[7], listeningToDisconnected[8], listeningToNU[9]}
7, T, 1000	# IdleEntryTime SwitchTime time when ChannelState last became present or altered its value 
8, E				# CallsByCategory Breakdown of TotalCalls/TotalCallTime
[sw.0.8.6.14.1.0.8]
#CallsByCategory
0, E 						#	CallCountsInCategoriesList
0.1, E 					#	CallCountsInCategoriesEntry
0.1.0, C, 1			#	Category	CallCategoryEnumeration	{Outgoing[1], IncomingAnswered[2], IncomingAbandoned[3]}
0.1.1, C, 5			#	TotalCalls	Cardinal	total calls in category
0.1.2, C, 2000	#	TotalCallTime	ElapsedTimeInSeconds	total time on all these calls
0.2.0, C, 2			#	Category	CallCategoryEnumeration	{Outgoing[1], IncomingAnswered[2], IncomingAbandoned[3]}
0.2.1, C, 10		#	TotalCalls	Cardinal	total calls in category
0.2.2, C, 1000	#	TotalCallTime	ElapsedTimeInSeconds	total time on all these calls
0.2.3, C, 30		#	TotalRingTime	ElapsedTimeInSeconds	total ringing time on all these calls
0.3.0, C, 3			#	Category	CallCategoryEnumeration	{Outgoing[1], IncomingAnswered[2], IncomingAbandoned[3]}
0.3.1, C, 3			#	TotalCalls	Cardinal	total calls in category
0.3.3, C, 40		#	TotalRingTime	ElapsedTimeInSeconds	total ringing time on all these calls
1, T, 2000			#	CountStartTime	SwitchTime	time when all counts were initialised to zero
2, E 						#	Command	Reset counts command is possible
[sw.0.8.6.14.2.0]
# TrunkChannnel
0, C, 10		#	TrunkNumber	Line number as used internally by IP Office (trunk is analogue trunk)
2, C, 2			#	AnalogueSignallingType	AlogSignalling Enum {Loopstart[1], LoopstartCLI[2], Groundstart[3], E&Mtie[4], E&MDID[5], E&MSw56[6], Did[7], Clear64[8], OutOfService[9]}
4, C, 2			#	ServiceType	AT&TService Enumeration {CallByCall[1], SDN[2], MegacomWats[3], Megacom800[4], Wats[5], Accunet[6], PrivateLine[7], Multiquest[8], ETN[9], I800[10], ILDS[11]}
6, C, 2			# ChannelState IdleChannelStateEnum {Normal[1], Clearing[2], OutOfService[3], BusyWrapUp[4], ConnectedWAN[5], Prealerting[6], listeningToBusy[7], listeningToDisconnected[8], listeningToNU[9]}
7, T, 20000	# IdleEntryTime SwitchTime time when ChannelState last became present or altered its value 
8, E				# CallsByCategory Breakdown of TotalCalls/TotalCallTime
[sw.0.8.6.14.2.0.8]
#CallsByCategory
0, E 					#	CallCountsInCategoriesList
0.1, E 				#	CallCountsInCategoriesEntry
0.1.0, C, 1		#	Category	CallCategoryEnumeration	{Outgoing[1], IncomingAnswered[2], IncomingAbandoned[3]}
0.1.1, C, 2		#	TotalCalls	Cardinal	total calls in category
0.1.2, C, 200	#	TotalCallTime	ElapsedTimeInSeconds	total time on all these calls
0.2.0, C, 2		#	Category	CallCategoryEnumeration	{Outgoing[1], IncomingAnswered[2], IncomingAbandoned[3]}
0.2.1, C, 3		#	TotalCalls	Cardinal	total calls in category
0.2.2, C, 100	#	TotalCallTime	ElapsedTimeInSeconds	total time on all these calls
0.2.3, C, 20	#	TotalRingTime	ElapsedTimeInSeconds	total ringing time on all these calls
0.3.0, C, 3		#	Category	CallCategoryEnumeration	{Outgoing[1], IncomingAnswered[2], IncomingAbandoned[3]}
0.3.1, C, 1		#	TotalCalls	Cardinal	total calls in category
0.3.3, C, 50	#	TotalRingTime	ElapsedTimeInSeconds	total ringing time on all these calls
1, T, 4000		#	CountStartTime	SwitchTime	time when all counts were initialised to zero
2, E 					#	Command	Reset counts command is possible

[sw.0.9.6]
# Voip Trunk Group
0, C,	11				#	TrunkNumber	Line number as used internally by IP Office (trunk is digital or VoIP trunk)
6, I, 127.0.0.4	#	TrunkGatewayAddress	The IP address for the trunk, as configured using Manager
7, C,	1					#	CompressionOffered	VoIPCompression Enumeration {Auto[1], 64transparent[2], G711A[3], G711Mu[4], G729A[5], G729simple[6], ADPCM32[7], ADPCM16[8], Netcoder8[9], G7231[10]}
8, E 						#	DirectMediaAllowed trunk is VoIP trunk with this config option
9, E 						#	EnableFastStart trunk is VoIP trunk with this config option
10, E 					#	SilenceSuppression trunk is VoIP trunk with this config option
11, C,	1				#	SCNStatus	SCNStatus Enumeration {NotEnabled[1],Up[2],Down[3]}
14.1, E 				#	TrunkChannel
14.2, E 				#	TrunkChannel
15, E 					#	CallsByCategory Breakdown of TotalCalls/TotalCallTime
17, E						# AlarmList 
17.0, E					# AlarmInfo
17.0.0, E				# TrunkGroupAlarm
18, 	E					# LoopbackAlarm 
[sw.0.9.6.14.1.0]
5, R, sw.19.0.1.0	#	ActiveCall	CallRef
6, C, 2						# ChannelState IdleChannelStateEnum {Normal[1], Clearing[2], OutOfService[3], BusyWrapUp[4], ConnectedWAN[5], Prealerting[6], listeningToBusy[7], listeningToDisconnected[8], listeningToNU[9]}
7, T, 20000				# IdleEntryTime SwitchTime time when ChannelState last became present or altered its value 
10, I, 143.1.10.0	#	CallPeer	the endpoint IP address across this trunk for this call
[sw.0.9.6.14.2.0]
5, R, sw.19.0.2.0	#	ActiveCall	CallRef
6, C, 3						# ChannelState IdleChannelStateEnum {Normal[1], Clearing[2], OutOfService[3], BusyWrapUp[4], ConnectedWAN[5], Prealerting[6], listeningToBusy[7], listeningToDisconnected[8], listeningToNU[9]}
7, T, 10000				# IdleEntryTime SwitchTime time when ChannelState last became present or altered its value 
10, I, 143.1.10.1	#	CallPeer	the endpoint IP address across this trunk for this call
[sw.0.9.6.15]
#CallsByCategory
0, E 						#	CallCountsInCategoriesList
0.1, E 					#	CallCountsInCategoriesEntry
0.1.0, C, 1			#	Category	CallCategoryEnumeration	{Outgoing[1], IncomingAnswered[2], IncomingAbandoned[3]}
0.1.1, C, 5			#	TotalCalls	Cardinal	total calls in category
0.1.2, C, 2000	#	TotalCallTime	ElapsedTimeInSeconds	total time on all these calls
0.2.0, C, 2			#	Category	CallCategoryEnumeration	{Outgoing[1], IncomingAnswered[2], IncomingAbandoned[3]}
0.2.1, C, 10		#	TotalCalls	Cardinal	total calls in category
0.2.2, C, 1000	#	TotalCallTime	ElapsedTimeInSeconds	total time on all these calls
0.2.3, C, 30		#	TotalRingTime	ElapsedTimeInSeconds	total ringing time on all these calls
0.3.0, C, 3			#	Category	CallCategoryEnumeration	{Outgoing[1], IncomingAnswered[2], IncomingAbandoned[3]}
0.3.1, C, 3			#	TotalCalls	Cardinal	total calls in category
0.3.3, C, 40		#	TotalRingTime	ElapsedTimeInSeconds	total ringing time on all these calls
1, T, 2000			#	CountStartTime	SwitchTime	time when all counts were initialised to zero
2, E 						#	Command	Reset counts command is possible
[sw.0.9.6.17.0.0]
# TrunkGroupAlarm
0, E				#	GenericInfo Existence
0.0, T, 0		#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 10	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.3, E			#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, C, 6			#	AlarmType	TrunkGroupAlarmType Enumeration {LOS [1], OOS[2], RedAlarm[3], BlueAlarm[4], YellowAlarm[5], IPConnectFail[6]}
[sw.0.9.6.18]
# LoopbackAlarm
0, E				#	GenericInfo Existence
0.0, T, 0		#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 5		#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E			#	Current	Existence Alarm condition is still present
0.3, E			#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, E				#	LoopbacksPresent Existence
1.1, E			#	LoopbackPresent Existence
1.1.0, C, 1	#	LoopbackType LoopbackType Enumeration {NearEndPayload[1], NearEndLine[2], NearEndInward[3], NearEndOther[4], FarEndPayload[5], FarEndLine[6]}

[sw.0.10.6]
# Voip Trunk Group
0, C,	12				#	TrunkNumber	Line number as used internally by IP Office (trunk is digital or VoIP trunk)
5, I, 127.0.0.5	#	TrunkPeerAddress	The peer address to which this trunk is connected (trunk is SIP trunk which is connected to remote peer)
6, I, 127.0.0.6	#	TrunkGatewayAddress	The IP address for the trunk, as configured using Manager
7, C,	2					#	CompressionOffered	VoIPCompression Enumeration {Auto[1], 64transparent[2], G711A[3], G711Mu[4], G729A[5], G729simple[6], ADPCM32[7], ADPCM16[8], Netcoder8[9], G7231[10]}
11, C, 2				#	SCNStatus	SCNStatus Enumeration {NotEnabled[1],Up[2],Down[3]}
14.1, E 				#	TrunkChannel
14.2, E 				#	TrunkChannel
14.3, E 				#	TrunkChannel
14.4, E 				#	TrunkChannel
[sw.0.10.6.14.1.0]
5, R, sw.19.0.2.0	#	ActiveCall	CallRef
7, T, 20000	# IdleEntryTime SwitchTime time when ChannelState last became present or altered its value 
[sw.0.10.6.14.2.0]
7, T, 30000	# IdleEntryTime SwitchTime time when ChannelState last became present or altered its value 
[sw.0.10.6.14.3.0]
5, R, sw.19.0.17.0	#	ActiveCall	CallRef
7, T, 40000	# IdleEntryTime SwitchTime time when ChannelState last became present or altered its value 
[sw.0.10.6.14.4.0]
5, R, sw.19.0.21.0	#	ActiveCall	CallRef
7, T, 50000	# IdleEntryTime SwitchTime time when ChannelState last became present or altered its value 

[sw.0.15.6]
# Voip Trunk Group (SES Trunk)
0, C, 13				#	TrunkNumber	Line number as used internally by IP Office (trunk is digital or VoIP trunk)
5, I, 127.0.0.9		#	TrunkPeerAddress	The peer address to which this trunk is connected (trunk is SIP trunk which is connected to remote peer)
6, I, 127.0.0.10	#	TrunkGatewayAddress	The IP address for the trunk, as configured using Manager
7, C,	5					#	CompressionOffered	VoIPCompression Enumeration {Auto[1], 64transparent[2], G711A[3], G711Mu[4], G729A[5], G729simple[6], ADPCM32[7], ADPCM16[8], Netcoder8[9], G7231[10]}
11, C, 1				#	SCNStatus	SCNStatus Enumeration {NotEnabled[1],Up[2],Down[3]}
14.1, E 				#	TrunkChannel
14.2, E 				#	TrunkChannel
[sw.0.15.6.14.1.0]
5, R, sw.19.0.22.0	#	ActiveCall	CallRef
7, T, 80000	# IdleEntryTime SwitchTime time when ChannelState last became present or altered its value 
[sw.0.15.6.14.2.0]
7, T, 90000	# IdleEntryTime SwitchTime time when ChannelState last became present or altered its value 

[sw.0.3.8]
# Extension Group (Expansion Module 1, DS30V1)
1.1.1, K, 101	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.2.1, K, 102	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.3.1, K, 103	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.4.1, K, 104	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.5.1, K, 105	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.6.1, K, 106	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.7.1, K, 107	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.8.1, K, 108	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.9.1, K, 109	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.10.1, K, 110	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.11.1, K, 111	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.12.1, K, 112	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.13.1, K, 113	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.14.1, K, 114	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.15.1, K, 115	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.16.1, K, 116	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.17.1, K, 117	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.18.1, K, 118	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.19.1, K, 119	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.20.1, K, 120	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.21.1, K, 121	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.22.1, K, 122	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.23.1, K, 123	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.24.1, K, 124	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.25.1, K, 125	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.26.1, K, 126	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.27.1, K, 127	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.28.1, K, 128	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.29.1, K, 129	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.30.1, K, 130	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
# Extension 101
[sw.0.3.8.1.1]
0, E
1, K, 101
[sw.0.3.8.1.1.0]
1, K, 101	#	UserNumber	KeypadSequence	indicates the logged-in user number	phone is connected/port is analogue and user is logged in
2, S, OneHunderdOne	# UserName String	indicates the logged-in user or NoUser	phone is connected or port is analogue
# Extension 102
[sw.0.3.8.1.2]
0, E
1, K, 102
[sw.0.3.8.1.2.0]
1, K, 102	#	UserNumber	KeypadSequence	indicates the logged-in user number	phone is connected/port is analogue and user is logged in
2, S, OneHunderdTwo	# UserName	String	indicates the logged-in user or NoUser	phone is connected or port is analogue
8, C, 2

[sw.0.3.8.1.6]
# ExtensionEntry 106
0, E	# ExtensionInfo
1, K, 106		# DefaultNumber
[sw.0.3.8.1.6.0]
# Extension 106
1, K, 106	#	UserNumber	KeypadSequence	indicates the logged-in user number	phone is connected/port is analogue and user is logged in
2, S, OneHundertSix	# UserName	String	indicates the logged-in user or NoUser	phone is connected or port is analogue
6, C, 1 	# DNDStatus
9, C, 28	# SetType
10.0.2, R, sw.19.0.11.0	# active call
15, C, 2  # MWIStatus
16, C, 1	# NumberNewMessages
[sw.0.3.8.1.8]
# ExtensionEntry 108
0, E	# ExtensionInfo
1, K, 108		# DefaultNumber
[sw.0.3.8.1.8.0]
# Extension 108
1, K, 108	#	UserNumber	KeypadSequence	indicates the logged-in user number	phone is connected/port is analogue and user is logged in
2, S, OneHundertSeven	# UserName	String	indicates the logged-in user or NoUser	phone is connected or port is analogue
6, C, 2 	# DNDStatus
9, C, 29	# SetType
10.0.2, R, sw.19.0.14.0	# active call
15, C, 1  # MWIStatus
16, C, 0	# NumberNewMessages
[sw.0.3.8.1.30.0]
# Extension 130
1, K, 130	#	UserNumber	KeypadSequence	indicates the logged-in user number	phone is connected/port is analogue and user is logged in
2, S, OneHunderdThirty	# UserName	String	indicates the logged-in user or NoUser	phone is connected or port is analogue

[sw.0.6.8]
# Extension Group (Basegroup DSPhones)
1.1.1, K, 601	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.2.1, K, 602	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.3.1, K, 603	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.4.1, K, 604	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.5.1, K, 605	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.6.1, K, 606	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.7.1, K, 607	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.8.1, K, 608	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
[sw.0.6.8.1.1]
1, K, 601	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
[sw.0.6.8.1.2]
1, K, 602	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
[sw.0.6.8.1.3]
1, K, 603	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
[sw.0.6.8.1.4]
1, K, 604	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
[sw.0.6.8.1.5]
1, K, 605	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
[sw.0.6.8.1.6]
1, K, 606	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
[sw.0.6.8.1.7]
1, K, 607	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
[sw.0.6.8.1.8]
1, K, 608	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
[sw.0.6.8.1.1.0]
# Extension 601
1, K, 601	#	UserNumber	KeypadSequence	indicates the logged-in user number	phone is connected/port is analogue and user is logged in
2, S, Six-O-One	# UserName String	indicates the logged-in user or NoUser	phone is connected or port is analogue
3.1.0, C, 1
3.1.1, K, 603
3.1.0, C, 2
3.1.1, K, 604
4, C, 1
5, K, 602
6, C, 2
16, C, 1 # Number of new messages
17, C, 2
[sw.0.6.8.1.1.4] # decice change alarm
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 2	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
[sw.0.6.8.1.2.0]
# Extension 602
1, K, 602	#	UserNumber	KeypadSequence	indicates the logged-in user number	phone is connected/port is analogue and user is logged in
2, S, Six-O-Two	# UserName	String	indicates the logged-in user or NoUser	phone is connected or port is analogue
4, C, 2
5, K, 601
15, C, 1
16, C, 0 # Number of new messages
17, C, 1
[sw.0.6.8.1.8.0]
# Extension 608
1, K, 608	#	UserNumber	KeypadSequence	indicates the logged-in user number	phone is connected/port is analogdSequence	indicates the default extension number for this extension	
2, S, Six-O-Eight	# UserName	String	indicates the logged-in user or NoUser	phone is connected or port is analogue
3.1.0, C, 4
3.1.1, K, 701
4, C, 3
5, K, 01771234567
[sw.0.7.8]
# Extension Group (Basegroup POTPhones)
1.1.1, K, 701	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.2.1, K, 702	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
[sw.0.7.8.1.1]
1, K, 701	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
[sw.0.7.8.1.2]
1, K, 702	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
[sw.0.7.8.1.1.0]
# Extension 701
1, K, 701	#	UserNumber	KeypadSequence	indicates the logged-in user number	phone is connected/port is analogue and user is logged in
2, S, Seven-O-One	# UserName String	indicates the logged-in user or NoUser	phone is connected or port is analogue
16, C, 2 # Number of new messages
[sw.0.7.8.1.2.0]
# Extension 702
1, K, 702	#	UserNumber	KeypadSequence	indicates the logged-in user number	phone is connected/port is analogue and user is logged in
2, S, Seven-O-Two	# UserName String	indicates the logged-in user or NoUser	phone is connected or port is analogue
3.0.0, C, 3
3.0.1, K, 701
16, C, 11 # Number of new messages

[sw.0.11.8]
# Extension Group (Avaya IP Phones)
1.1.0, E	#	Extention
1.1.1, K, 1101	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.1.2, I, 192.168.11.1	# Peer IP address
1.1.3, M, 20015998341291	# MAC address
1.2.0, E	#	Extention
1.2.1, K, 1102	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.2.2, I, 192.168.11.2	# Peer IP address
[sw.0.11.8.1.1]
0, E	#	Extention
1, K, 1101	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
2, I, 192.168.11.1	# Peer IP address
3, M, 20015998341291	# MAC address
[sw.0.11.8.1.1.0]
0, C, 2
1, K, 1101	# User Number
2, S, Eleven-O-One	# User name
9, C, 10	# 4610
[sw.0.11.8.1.2]
0, E	#	Extention
1, K, 1102	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
2, I, 192.168.11.2	# Peer IP address
[sw.0.11.8.1.2.0]
1, K, 1102	# User Number
2, S, Eleven-O-Two	# User name
9, C, 10	# 4610
20, E	# VPN Phone

[sw.0.12.8]
# Extension Group (Open H.323 Phones)
1.0.0, E	#	Extention
1.0.1, K, 1201	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.0.2, I, 192.168.12.1	# Peer IP address
1.0.3, M, 303174162	# MAC address
[0.12.8.1.0.0]
1, K, 1201	# User Number
2, S, Twelve-O-One	# User name

[sw.0.13.8]
# Extension Group (DECT Extensions)
1.0.0, E	#	Extention
1.0.1, K, 1301	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.0.2, I, 192.168.13.1	# Peer IP address
1.0.3, M, 13	# MAC address
[sw.0.13.8.1.0.0]
1, K, 1301	# User Number
2, S, Thirty-O-One	# User name

[sw.0.14.8]
# Extension Group (Virtual Extensions)
1.0.0, E	#	Extention
1.0.1, K, 1401	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.0.5, C, 1	# Extension is telecommuter extension
1.1.0, E	#	Extention
1.1.1, K, 1402	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.1.5, C, 1	# Extension is telecommuter extension
1.2.0, E	#	Extention
1.2.1, K, 1101	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.2.5, C, 2	# Extension is mobile twin extension
1.3.0, E	#	Extention
1.3.1, K, 1102	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.3.5, C, 2	# Extension is mobile twin extension
[sw.0.14.8.1.0]
1, K, 1401	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
5, C, 1		# Extension is telecommuter extension
[sw.0.14.8.1.0.0]
1, K, 1401	# User Number
2, S, Telecommuter 1	# User name
7, C, 4		# {Paging Speaker[1], POT[2], CLI POT[3], Telecommuter [4], MobileTwin[5]}
10.0.2, R, sw.19.0.20.0		# active call
[sw.0.14.8.1.1]
1, K, 1402	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
5, C, 1		# Extension is telecommuter extension
[sw.0.14.8.1.1.0]
1, K, 1402	# User Number
7, C, 4		# {Paging Speaker[1], POT[2], CLI POT[3], Telecommuter [4], MobileTwin[5]}
[sw.0.14.8.1.2]
1, K, 1101	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
5, C, 2		# Extension is mobile twin extension
[sw.0.14.8.1.2.0]
1, K, 1101	# User Number
2, S, Eleven-O-One	# User Name
7, C, 5		# {Paging Speaker[1], POT[2], CLI POT[3], Telecommuter [4], MobileTwin[5]}
[sw.0.14.8.1.3]
1, K, 1102	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
5, C, 2		# Extension is mobile twin extension
[sw.0.14.8.1.3.0]
1, K, 1102	# User Number
2, S, Eleven-O-Two	# User Name
7, C, 5		# {Paging Speaker[1], POT[2], CLI POT[3], Telecommuter [4], MobileTwin[5]}
16, C, 12	# Number of new messages

[sw.6]
# System Info
0.1.0, C, 1		#	ResourceType	SysResourceType Enumeration	{DataChannel[1], VCMChannel[2], VMChannel[3], ModemChannel[4], ConferenceChannel[5]}	[one entry is always present for each of these resource types]
0.1.1, C, 0		#	ChannelsInstalled	Cardinal		
0.1.3, C, 0		#	ChannelsInUse	Cardinal		
0.1.4, E		#	CongestionAlarm	resource allocation has ever failed, always a historic alarm, classified as ServiceAlarm
0.1.4.0, E		#	GenericInfo Existence
0.1.4.0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1.4.0.1, C, 1	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.1.4.0.2, E		#	Current	Existence Alarm condition is still present
0.1.4.0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null

0.2.0, C, 2		#	ResourceType	SysResourceType Enumeration	{DataChannel[1], VCMChannel[2], VMChannel[3], ModemChannel[4], ConferenceChannel[5]}	[one entry is always present for each of these resource types]
0.2.1, C, 10		#	ChannelsInstalled	Cardinal		
0.2.2, C, 5		#	FirstBankSize	Cardinal	For devices of which two banks can be fitted: channels in the first bank 	two banks fitted (can only apply to VCMs and Conference devices)
0.2.3, C, 10		#	ChannelsInUse	Cardinal		
0.2.4, E		#	!a copy of this block exists below! CongestionAlarm	resource allocation has ever failed, always a historic alarm, classified as ServiceAlarm
0.2.4.0, E		#	GenericInfo Existence
0.2.4.0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.2.4.0.1, C, 2	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2.4.0.2, E		#	Current	Existence Alarm condition is still present
0.2.4.0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null

0.3.0, C, 3		#	ResourceType	SysResourceType Enumeration	{DataChannel[1], VCMChannel[2], VMChannel[3], ModemChannel[4], ConferenceChannel[5]}	[one entry is always present for each of these resource types]
0.3.1, C, 20		#	ChannelsInstalled	Cardinal		
0.3.3, C, 15		#	ChannelsInUse	Cardinal		
0.3.4, E		#	!a copy of this block exists below! CongestionAlarm	resource allocation has ever failed, always a historic alarm, classified as ServiceAlarm
0.3.4.0, E		#	GenericInfo Existence
0.3.4.0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.3.4.0.1, C, 3	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.3.4.0.2, E		#	Current	Existence Alarm condition is still present
0.3.4.0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null

0.4.0, C, 4		#	ResourceType	SysResourceType Enumeration	{DataChannel[1], VCMChannel[2], VMChannel[3], ModemChannel[4], ConferenceChannel[5]}	[one entry is always present for each of these resource types]
0.4.1, C, 8		#	ChannelsInstalled	Cardinal		
0.4.3, C, 0		#	ChannelsInUse	Cardinal		
0.4.4, E		#	!a copy of this block exists below! CongestionAlarm	resource allocation has ever failed, always a historic alarm, classified as ServiceAlarm
0.4.4.0, E		#	GenericInfo Existence
0.4.4.0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.4.4.0.1, C, 4	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.4.4.0.2, E		#	Current	Existence Alarm condition is still present
0.4.4.0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null

0.5.0, C, 5		#	ResourceType	SysResourceType Enumeration	{DataChannel[1], VCMChannel[2], VMChannel[3], ModemChannel[4], ConferenceChannel[5]}	[one entry is always present for each of these resource types]
0.5.1, C, 64		#	ChannelsInstalled	Cardinal		
0.5.2, C, 64		#	FirstBankSize	Cardinal	For devices of which two banks can be fitted: channels in the first bank 	two banks fitted (can only apply to VCMs and Conference devices)
0.5.3, C, 2		#	ChannelsInUse	Cardinal		
0.5.4, E		#	!a copy of this block exists below! CongestionAlarm	resource allocation has ever failed, always a historic alarm, classified as ServiceAlarm
0.5.4.0, E		#	GenericInfo Existence
0.5.4.0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.5.4.0.1, C, 5	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.5.4.0.2, E		#	Current	Existence Alarm condition is still present
0.5.4.0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null

4, C, 1		#	MusicSource	InternalExternal Enumeration	{Internal[1], External[2]}	
5, C, 100		#	MaxConfigSize	Cardinal	total available space in this system for storing config file, in Kbytes	
6, C, 88	#	CurrentConfigSize	Cardinal	space used by current config file, in Kbytes	
#7	AuthenticationFailures	List		
#7.i	AuthenticationFailure	Key		
#7.i.0	AuthenticationAlarm	AuthenticationAlarmLink		
#8	DeltaServerLinkInfo	UpdownHistoryLink	classified as a linkAlarm	a delta server user and password is configured for this switch
#9	OGCongestionAlarms	List		
#9.i	OGCongestionAlarm	Key		
#9.i.0	OGCongestion	OGFullAlarmLink	indicates no free channels corresponding to an Outgoing Group were available	
10, E	#	LostAlarm	LostAlarmObject		historic alarms have been discarded due to lack of space
10.0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
10.0.1, C, 100	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
10.1, C, 500	# discarded events
11, C, 33	#	CPUusage	Cardinal	as percentage - updated every second	time to instrument this in release 4.0
12, C, 512	# MemoryFree	Cardinal	in Kbytes - updated every second	time to instrument this in release 4.0
15.1.0, C, 3	# OEMCardType = CompactFlash
15.1.1, C, 3	# CardType = CompactFlash
15.1.2, C, 128	# CardSize
15.1.3, S, SanDisk Ltd. # CardInfo
16, C, 2	# Operating mode
#17, C, 1	# ExpansionPortsDisabled
18, S, 2.4	# LoaderVersion
19, S, 3.3.500 # CPUVersion
20, C, 44 # PCBVersion
21, C, 555 # PLDVersion
22, C, 6666 # PCBOptions
23, C, 1 # FPGA id
24, C, 22 # FPGA issue
25, C, 333 # FPGA build
26, C, 64 # NAND flash size
27, S, National Semiconductors # NAND info
28, E		# RTC battery present
29, T, 0	# RTC last update
30, M, 18838586676582	# LAN1 MAC
31, M, 48057234611961600 # LAN2 MAC
32, C, 1
33, S, Steffen Brandt, Avaya GmbH & Co. KG , Kleyerstr. 94, D-60433 Frankfurt am Main, GERMANY, Tel. +496975053415, Fax +4969750553415
34, E
35, E	# ClockSourceAlarm
35.0.0, T, 0
35.0.1, C, 2
35.1, R, sw.0.2.7.9.0

[sw.6.0.1.4]
#Congestion alarm relating to resource type 1 DataChannel
0, E		#	GenericInfo Existence
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 1	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null

[sw.6.0.2.4]
#Congestion alarm relating to resource type 2 VCMChannel
0, E		#	GenericInfo Existence
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 2	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null

[sw.6.0.3.4]
#Congestion alarm relating to resource type 3 VMChannel
0, E		#	GenericInfo Existence
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 3	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null

[sw.6.0.4.4]
#Congestion alarm relating to resource type 4 ModemChannel
0, E		#	GenericInfo Existence
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 4	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
# 0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null

[sw.6.0.5.4]
#Congestion alarm relating to resource type 5 ConferenceChannel
0, E		#	GenericInfo Existence
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 5	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
# 0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null

[sw.6.7.0.0]
# AuthenticationAlarm #1
0, E		#	GenericInfo Existence
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 1	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, C, 1   # Connection type Manager
2, C, 1   # Failure Type
3, S, KarlNapp # User Name
4, K, 204 # User Number
5, I, 192.168.12.1	# IP address
6, S, RAS # RAS

[sw.6.7.1.0]
# AuthenticationAlarm #2
0, E		#	GenericInfo Existence
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 1	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, C, 6   # Connection type VoIP
2, C, 0   # Failure Type
3, S, Cumulus # User Name
4, K, 204 # User Number
5, I, 192.168.12.1	# IP address
6, S, RAS # RAS

[sw.6.7.2.0]
# AuthenticationAlarm #3
0, E		#	GenericInfo Existence
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 1	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, C, 2   # Connection type Monitor
2, C, 0   # Failure Type
3, S, Cumulus # User Name
4, K, 204 # User Number
5, I, 192.168.12.1	# IP address
6, S, RAS # RAS

[sw.6.7.3.0]
# AuthenticationAlarm #4
0, E		#	GenericInfo Existence
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 1	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, C, 3   # Connection type SSA
2, C, 0   # Failure Type
3, S, Cumulus # User Name
4, K, 204 # User Number
5, I, 192.168.12.1	# IP address
6, S, RAS # RAS

[sw.6.7.4.0]
# AuthenticationAlarm #5
0, E		#	GenericInfo Existence
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 1	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, C, 4   # Connection type RAS
2, C, 0   # Failure Type
3, S, Cumulus # User Name
4, K, 204 # User Number
5, I, 192.168.12.1	# IP address
6, S, RAS # RAS

[sw.6.7.5.0]
# AuthenticationAlarm #6
0, E		#	GenericInfo Existence
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 1	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, C, 5   # Connection type VM
2, C, 0   # Failure Type
3, S, Cumulus # User Name
4, K, 204 # User Number
5, I, 192.168.12.1	# IP address
6, S, RAS # RAS

[sw.6.7.6.0]
# AuthenticationAlarm #7
0, E		#	GenericInfo Existence
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 1	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, C, 7   # Connection type SNMP
2, C, 0   # Failure Type
3, S, Cumulus # User Name
4, K, 204 # User Number
5, I, 192.168.12.1	# IP address
6, S, RAS # RAS

[sw.6.7.7.0]
# AuthenticationAlarm #8
0, E		#	GenericInfo Existence
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 1	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, C, 9   # Connection type DeltaServer
2, C, 0   # Failure Type
3, S, Cumulus # User Name
4, K, 204 # User Number
5, I, 192.168.12.1	# IP address
6, S, RAS # RAS

[sw.6.7.8.0]
# AuthenticationAlarm #9
0, E		#	GenericInfo Existence
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 1	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, C, 10   # Connection type VMSystem
2, C, 0   # Failure Type
3, S, Cumulus # User Name
4, K, 204 # User Number
5, I, 192.168.12.1	# IP address
6, S, RAS # RAS

[sw.6.9.0.0]
# CongestionAlarm #1
0, E		#	GenericInfo Existence
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 1	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
# 0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, C, 30 # OCR number

[sw.6.10]
# LostAlarm
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 100	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
1, C, 500	# discarded events

[sw.6.35]
# ClockSourceAlarm
0.0, T, 0
0.1, C, 2
1, R, sw.0.2.7.9.0

[sw.11]
# InterfaceTable Object
0, E		# Interfaces	List		
0.1, E	#	Interface	Key		
0.1.0, E	#	InterfaceInfo	InterfaceObject
0.1.0.0, S, LAN1	#	PortOrServiceName	String	Port name for LAN ports; service name otherwise	
0.1.0.1, C, 1		#	Type	InterfaceType Enumeration	{LAN[1], SyncSerial[2], NailedUpSerial[3], DialUp[4]}
0.1.0.3, E 	#	PingFromInterface	Command	send out pings from the IP Office address on this interface  to this destination, ReturnValues is    InstanceTag: Cardinal
0.2, E	#	Interface	Key		
0.2.0, E	#	InterfaceInfo	InterfaceObject
0.2.0.0, S, Internet	#	PortOrServiceName	String	Port name for LAN ports; service name otherwise	
0.2.0.1, C, 4		#	Type	InterfaceType Enumeration	{LAN[1], SyncSerial[2], NailedUpSerial[3], DialUp[4]}
0.2.0.3, E 	#	PingFromInterface	Command	send out pings from the IP Office address on this interface  to this destination, ReturnValues is    InstanceTag: Cardinal

[sw.12]
#	RoutingTable	Object		
0, C, 1		#	RoutePreference	RoutePreference Enumeration	{PreferStatic[1], PreferRIP[2]}	
1, E	#	Routes	List		
1.1, E	# Route	Key		
1.1.0, I, 135.124.66.0	#	DestinationAddresses	IPAddress	address[es] to which route is provided, subject to this mask. 	[fields that are blank in manager show as 0.0.0.0 in these two fields]
1.1.1, I, 255.255.255.0	#	SubnetMask	IPAddress		
1.1.2, R, sw.11.0.1.0		#	ExitInterface	InterfaceRef	exit port from this device for this route entry	RouteType is not via a tunnel [manager calls this exit interface the 'destination']
#rt.1.i.3	Tunnel TunnelRef tunnel associated with this entry RouteType is an IPSec tunnel or Static via an L2TP tunnel
#rt.1.i.4	NextHop	IPAddress	router to which packets for these DestinationAddresses should be relayed, or tunnel endpoint for IPSec tunnels	RIP learnt or configured in Manager  [as 'gateway address'] 
1.1.5, C, 0 	#	Metric	Cardinal		
1.1.6, C, 1		#	RouteType	RouteType Enumeration	{DirectlyAttached[1], Static[2], DHCPras[3], RIPLearnt[4], IPSecTunnel[5]}	[DCHPras indicates routes to IP addresses assigned from LAN1 address space for dial-in sessions; Proxy ARP is provided for these addresses on LAN1]
#rt.1.i.7 SourceAddresses	IPAddress	address[es] from which route is provided, subject to this mask.	Route type is IPSec tunnel
#rt.1.i.8 SourceMask	IPAddress		
1.2.0, I, 135.124.67.0	#	DestinationAddresses	IPAddress	address[es] to which route is provided, subject to this mask. 	[fields that are blank in manager show as 0.0.0.0 in these two fields]
1.2.1, I, 255.255.255.0	#	SubnetMask	IPAddress		
1.2.4, I, 135.124.66.1	#	NextHop	IPAddress	router to which packets for these DestinationAddresses should be relayed, or tunnel endpoint for IPSec tunnels	RIP learnt or configured in Manager  [as 'gateway address'] 
1.2.5, C, 0 	#	Metric	Cardinal		
1.2.6, C, 2		#	RouteType	RouteType Enumeration	{DirectlyAttached[1], Static[2], DHCPras[3], RIPLearnt[4], IPSecTunnel[5]}	[DCHPras indicates routes to IP addresses assigned from LAN1 address space for dial-in sessions; Proxy ARP is provided for these addresses on LAN1]
1.3.2, R, sw.11.0.2.0		#	ExitInterface	InterfaceRef	exit port from this device for this route entry	RouteType is not via a tunnel [manager calls this exit interface the 'destination']
1.3.5, C, 10 	#	Metric	Cardinal		
1.3.6, C, 2		#	RouteType	RouteType Enumeration	{DirectlyAttached[1], Static[2], DHCPras[3], RIPLearnt[4], IPSecTunnel[5]}	[DCHPras indicates routes to IP addresses assigned from LAN1 address space for dial-in sessions; Proxy ARP is provided for these addresses on LAN1]
1.4.0, I, 192.168.2.0	#	DestinationAddresses	IPAddress	address[es] to which route is provided, subject to this mask. 	[fields that are blank in manager show as 0.0.0.0 in these two fields]
1.4.1, I, 255.255.255.0	#	SubnetMask	IPAddress		
1.4.3, R, sw.13.0.1.0	#	Tunnel TunnelRef tunnel associated with this entry RouteType is an IPSec tunnel or Static via an L2TP tunnel
1.4.6, C, 5		#	RouteType	RouteType Enumeration	{DirectlyAttached[1], Static[2], DHCPras[3], RIPLearnt[4], IPSecTunnel[5]}	[DCHPras indicates routes to IP addresses assigned from LAN1 address space for dial-in sessions; Proxy ARP is provided for these addresses on LAN1]
1.4.7, I, 192.168.2.11 	# SourceAddresses	IPAddress	address[es] from which route is provided, subject to this mask.	Route type is IPSec tunnel
1.4.8, I, 192.168.2.0 	# SourceMask	IPAddress		

[sw.13]
#	VPNInfo	Object		
0, E	#	Tunnels	List		
0.1, E	#	Tunnel	Key		
0.1.0, E	#	TunnelInfo TunnelObject
0.1.0.0, S, The Tunnel #	Name	String		
0.1.0.1, C, 1	# Type	TunnelTypeEnumeration	{IPSec[1], L2TP[2]}
0.1.0.2, I, 10.0.0.1	# RemoteEndpoint	IPAddress		
0.1.0.3, E	# Associated	Existence		There is currently an active association for this tunnel 
0.2.0.0, S, The Second Tunnel #	Name	String		
0.2.0.1, C, 2	# Type	TunnelTypeEnumeration	{IPSec[1], L2TP[2]}
0.2.0.2, I, 10.1.2.3	# RemoteEndpoint	IPAddress		

[sw.14]
#LicenceInfo
0, C, 123456789		# FeatureKeyNumber
1, C, 1		# FeatureKeyServerType "Invalid", "PC", "LocalDongle"
2, I, 192.168.12.1	# IP address
3, E			# FKSlinkInfo (copy below!)
3.0, E		# UpDownHistory
3.1, E			# Initialising
3.1.0, E	# DownAlarm
3.1.0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
3.1.0.1, C, 1	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
3.1.0.2, E		#	Current	Existence Alarm condition is still present
3.1.0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
#4, T, 0   # LastPolledTime
5, E			# LicenceList
5.1.0, C, 5	# Type LicenceType Enumeration {TAPI[1], TAPICC[2], WAV[3] IMS[4], VMPRO[5], ICOSM[6], CTI_SUITE[7], CTI_DECT[8], PHONEMGR_PRO[9], PHONEMGR_IP[10], CCC_LITE[11], CCC_SVR[12], CCC_AGENT[13], CCC_SAC[14], CCC_ISA[15], CCC_WOC[16], CCC_BLF[17], VM_PORTS[18], CCC_EXTRA1[19], CCC_EXTRA2[20], IP_ENDPOINTS[21], PHONEMGR_PRO[22], CCC_EMAIL[23], CCC_CHAT[24], AUDIX_VMAIL[25], VM_VPIM[26], VM_SQL[27], VM_VBS[28 VM_RECORDINGS_ADMIN[29], VM_OUTLOOK[30], TTS_SCANSOFT[31], TTS_GENERIC[32], POWER_CONFERENCE[33], SMALLOFFICE_VCM[34], SMALLOFFICE_WIFI[35], IPSEC[36], PROACTIVE_REPORT[37], REPORT_VIEWER[38], MOBILE_TWINNING[39], SCN[40], VERSION4_SOFTWARE[41], EZOFFICE_OVERRIDE[42], H323_NETWORKING[43], IP500_VCM_CHANNELS[44], SIPTRUNK_CHANNELS[45]}       
5.1.1, E	# Instances List There may be one or more licences present of the same type
5.1.1.1, E	# Instance  Key
5.1.1.1.0, S, 1234567890ABCDEFGHIJKLMNOPQRSTUV  # LicenceString String 32-character licence as supplied by Avaya
5.1.1.1.1, C, 1 # Status LicenceStatus Enumeration {Valid[1], Malformed[2], FeatureKeyMismatch[3], MACAddressMismatch[4], Expired[5], IncompatibleWithEZOffice[6]}
5.1.1.1.2, A, 12/24/2038_18:00:00	# Expiry AbsoluteTime licence has limited life
5.1.1.1.3, C, 4	# InstancesLicensed Cardinal licence is for limited instances
5.1.2, C,	1 # InstancesInUse Cardinal
5.1.3, E #  LicenceOversubscribed ValidLicenceAlarmLink alarm occurs when switch requires more instances of the licence than are installed and valid
5.2.0, C, 9	# Type LicenceType Enumeration {TAPI[1], TAPICC[2], WAV[3] IMS[4], VMPRO[5], ICOSM[6], CTI_SUITE[7], CTI_DECT[8], PHONEMGR_PRO[9], PHONEMGR_IP[10], CCC_LITE[11], CCC_SVR[12], CCC_AGENT[13], CCC_SAC[14], CCC_ISA[15], CCC_WOC[16], CCC_BLF[17], VM_PORTS[18], CCC_EXTRA1[19], CCC_EXTRA2[20], IP_ENDPOINTS[21], PHONEMGR_PRO[22], CCC_EMAIL[23], CCC_CHAT[24], AUDIX_VMAIL[25], VM_VPIM[26], VM_SQL[27], VM_VBS[28 VM_RECORDINGS_ADMIN[29], VM_OUTLOOK[30], TTS_SCANSOFT[31], TTS_GENERIC[32], POWER_CONFERENCE[33], SMALLOFFICE_VCM[34], SMALLOFFICE_WIFI[35], IPSEC[36], PROACTIVE_REPORT[37], REPORT_VIEWER[38], MOBILE_TWINNING[39], SCN[40], VERSION4_SOFTWARE[41], EZOFFICE_OVERRIDE[42], H323_NETWORKING[43], IP500_VCM_CHANNELS[44], SIPTRUNK_CHANNELS[45]}       
5.2.1.1.0, S, ABCDEFGHIJKLMNOPQRSTUV1234567890  # LicenceString String 32-character licence as supplied by Avaya
5.2.1.1.1, C, 5 # Status LicenceStatus Enumeration {Valid[1], Malformed[2], FeatureKeyMismatch[3], MACAddressMismatch[4], Expired[5], IncompatibleWithEZOffice[6]}
5.2.1.1.2, A, 01/01/2006_00:00:00	# Expiry AbsoluteTime licence has limited life
5.2.1.2.0, S, 11111111111111111111111111111111  # LicenceString String 32-character licence as supplied by Avaya
5.2.1.2.1, C, 1 # Status LicenceStatus Enumeration {Valid[1], Malformed[2], FeatureKeyMismatch[3], MACAddressMismatch[4], Expired[5], IncompatibleWithEZOffice[6]}
5.2.1.2.3, C, 10	# InstancesLicensed Cardinal licence is for limited instances
5.2.1.3.0, S, 222  # LicenceString String 32-character licence as supplied by Avaya
5.2.1.3.1, C, 2 # Status LicenceStatus Enumeration {Valid[1], Malformed[2], FeatureKeyMismatch[3], MACAddressMismatch[4], Expired[5], IncompatibleWithEZOffice[6]}
5.2.2, C,	5 # InstancesInUse Cardinal
5.3.0, C, 40	# Type LicenceType Enumeration {TAPI[1], TAPICC[2], WAV[3] IMS[4], VMPRO[5], ICOSM[6], CTI_SUITE[7], CTI_DECT[8], PHONEMGR_PRO[9], PHONEMGR_IP[10], CCC_LITE[11], CCC_SVR[12], CCC_AGENT[13], CCC_SAC[14], CCC_ISA[15], CCC_WOC[16], CCC_BLF[17], VM_PORTS[18], CCC_EXTRA1[19], CCC_EXTRA2[20], IP_ENDPOINTS[21], PHONEMGR_PRO[22], CCC_EMAIL[23], CCC_CHAT[24], AUDIX_VMAIL[25], VM_VPIM[26], VM_SQL[27], VM_VBS[28 VM_RECORDINGS_ADMIN[29], VM_OUTLOOK[30], TTS_SCANSOFT[31], TTS_GENERIC[32], POWER_CONFERENCE[33], SMALLOFFICE_VCM[34], SMALLOFFICE_WIFI[35], IPSEC[36], PROACTIVE_REPORT[37], REPORT_VIEWER[38], MOBILE_TWINNING[39], SCN[40], VERSION4_SOFTWARE[41], EZOFFICE_OVERRIDE[42], H323_NETWORKING[43], IP500_VCM_CHANNELS[44], SIPTRUNK_CHANNELS[45]}       
5.3.1, E	# Instances List There may be one or more licences present of the same type
5.3.1.1, E	# Instance  Key
5.3.1.1.0, S, 22222222222222222222222222222222  # LicenceString String 32-character licence as supplied by Avaya
5.3.1.1.1, C, 1 # Status LicenceStatus Enumeration {Valid[1], Malformed[2], FeatureKeyMismatch[3], MACAddressMismatch[4], Expired[5], IncompatibleWithEZOffice[6]}
6.0.0, E    # GenLicenceAlarm
#7, E	# PingFKS

[sw.14.3]
# FKSlinkInfo
0, E		# UpDownHistory
1, E			# Initialising
1.0, E	# DownAlarm
1.0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
1.0.1, C, 1	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
1.0.2, E		#	Current	Existence Alarm condition is still present
1.0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null

[sw.14.5.1.3]
# LicenceOversubscribed Alarm (valid licence alarm)
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 284	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null

[sw.14.6.0.0]
# Licence not available Alarm
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 15	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, C, 7	#	Licence Type Enumeration CTI_SUITE[7]

[sw.15]
# Directory	Object		
#dir.0	LDAPServerAddress	IPAddress		LDAP is enabled
#dir.1	LastLDAPPollTime	SwitchTime	either successful poll or error	
#dir.2	LDAPLinkInfo	UpdownHistoryObject	Alarm of type serviceAlarm	link is, or has been, down
3, E		#	DirectoryEntries	List		
3.1, E	#	DirectoryEntry	Key		
3.1.0, E	#	EntryInfo	DirectoryEntryLink		
3.2.0, E	#	EntryInfo	DirectoryEntryLink		
3.3.0, E	#	EntryInfo	DirectoryEntryLink		
3.4.0, E	#	EntryInfo	DirectoryEntryLink		
3.5.0, E	#	EntryInfo	DirectoryEntryLink		
3.6.0, E	#	EntryInfo	DirectoryEntryLink		
4, E		#	DiscoveredSCNPeers	List	List of all peer switches that are currently in contact via the SCN  	One or more IP trunks has Voice Networking enabled
4.1, E	#	DiscoveredSCNPeer	Key		
4.1.0, I, 135.124.67.243	#	IPAddress	IPAddress		
4.1.1, S, IPO_Schuch	#	SystemName	String		
4.2.0, I, 135.124.67.242
5, E		#	ConflictingDialplanAlarm	DuplicateEntriesLink		One or more advertised numbers from an SCN peer conflicts with a directory entry
#dir.6	PingServer	Command	Ping from LAN1 to dir.0, ReturnValues is InstanceTag: Cardinal	LDAP is enabled
[sw.15.3.1.0]
#	DirectoryEntry Object	1
0, K, 201			#	Number	KeypadSequence		
1, S, Extn201	#	Name	String		
2, C, 1				# EntryType	DirectoryEntryType Enumeration	{User[1], HuntGroup[2], LDAP[3], LocalDirectory[4]}	
#de.3	SCNSource	FieldIndentifier	for users and huntgroups defined on other switches, the owning switch key in DiscoveredSCNPeers 	an SCN-learnt extension or group
#de.4	GUID	GUID		
#de.5	GroupMembers	GroupMembershipLink	identifies current members of a hunt group	entry is a huntgroup, including SCN-learnt
#de.6	ForceLogin	Existence		entry is an extension with ForceLogin set
#de.7	LoginCode	KeypadSequence		entry is an extension with a login code configured
[sw.15.3.2.0]
#	DirectoryEntry Object	2
0, K, 200			#	Number	KeypadSequence		
1, S, Main		#	Name	String		
2, C, 2				# EntryType	DirectoryEntryType Enumeration	{User[1], HuntGroup[2], LDAP[3], LocalDirectory[4]}	
5, E					#	GroupMembers	GroupMembershipLink	identifies current members of a hunt group	entry is a huntgroup, including SCN-learnt
[sw.15.3.3.0]
#	DirectoryEntry Object	3
0, K, 601			#	Number	KeypadSequence		
1, S, Extn601	#	Name	String		
2, C, 1				# EntryType	DirectoryEntryType Enumeration	{User[1], HuntGroup[2], LDAP[3], LocalDirectory[4]}	
3, R, sw.15.4.2	#	SCNSource	FieldIndentifier	for users and huntgroups defined on other switches, the owning switch key in DiscoveredSCNPeers 	an SCN-learnt extension or group
[sw.15.3.4.0]
#	DirectoryEntry Object	4
0, K, 301			#	Number	KeypadSequence		
1, S, Extn301	#	Name	String		
2, C, 1				# EntryType	DirectoryEntryType Enumeration	{User[1], HuntGroup[2], LDAP[3], LocalDirectory[4]}	
3, R, sw.15.4.1	#	SCNSource	FieldIndentifier	for users and huntgroups defined on other switches, the owning switch key in DiscoveredSCNPeers 	an SCN-learnt extension or group
[sw.15.3.5.0]
#	DirectoryEntry Object	5
0, K, 7777		#	Number	KeypadSequence		
2, C, 3				# EntryType	DirectoryEntryType Enumeration	{User[1], HuntGroup[2], LDAP[3], LocalDirectory[4]}	
[sw.15.3.6.0]
#	DirectoryEntry Object	6
0, K, 88888		#	Number	KeypadSequence		
1, S, AfterEight	#	Name	String		
2, C, 4				# EntryType	DirectoryEntryType Enumeration	{User[1], HuntGroup[2], LDAP[3], LocalDirectory[4]}	
[sw.15.5]
# dups	DuplicateEntries	Object	This is a single alarm of type ConfigAlarm that indicates multiple conflicting directory entries learnt from a single remote SCN switch and lists all duplicates - a current alarm if list is non-empty	there are or have been duplicates detected on this switch
0, E	#	GenericInfo	GenericAlarmInfoObject	The time in this object indicates when last the list of entries changed between empty and non-empty. The occurrence count is always 1 	
0.0, T, 0	#	LastOccurrenceTime	SwitchTime		
0.1, C, 1	#	NumberOfOccurrences	Cardinal	If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented	
0.2, E	#	Current	Existence		alarm condition is still present
1, E	#	Entries	List		
1.0.0, E		# EntryInfo	DuplicateEntryLink		
1.1.0, E		# EntryInfo	DuplicateEntryLink		
1.2.0, E		# EntryInfo	DuplicateEntryLink	
2, E	 # A list of SCN peers from which conflicting entries have been received since this alarm was cleared
2.0.0, I, 123.45.67.89
2.1.0, I, 1.2.3.4
[sw.15.5.1.0.0]
# dup	DuplicateEntry	Object	indicates an additional instance of a directory entry that has been overruled due to a conflict	
0, R, sw.15.3.4.0 	#	PrevailingEntry	DirectoryEntryRef		
1, R, sw.15.4.1		#	ConflictingEntrySource	FieldIdentifier	indicates the SCN peer from which the conflicting entry was received  this field points to a directory.discoveredSCNPeers. discoveredSCNPeer key field	
2, C, 1		#	ConflictingEntryType	DirectoryEntryType Enumeration	indicates the type associated with the conflicting entry  	[only types User, HuntGroup apply here]
[sw.15.5.1.1.0]
0, R, sw.15.3.1.0 	#	PrevailingEntry	DirectoryEntryRef		
1, R, sw.15.4.1		#	ConflictingEntrySource	FieldIdentifier	indicates the SCN peer from which the conflicting entry was received  this field points to a directory.discoveredSCNPeers. discoveredSCNPeer key field	
2, C, 2		#	ConflictingEntryType	DirectoryEntryType Enumeration	indicates the type associated with the conflicting entry  	[only types User, HuntGroup apply here]
[sw.15.5.1.2.0]
0, R, sw.15.3.2.0 	#	PrevailingEntry	DirectoryEntryRef		
1, R, sw.15.4.2		#	ConflictingEntrySource	FieldIdentifier	indicates the SCN peer from which the conflicting entry was received  this field points to a directory.discoveredSCNPeers. discoveredSCNPeer key field	
2, C, 1		#	ConflictingEntryType	DirectoryEntryType Enumeration	indicates the type associated with the conflicting entry  	[only types User, HuntGroup apply here]

[sw.16]
# vmi	VoiceMailInfo	Object		
0, C, 3		#	VoiceMailType 		{Embedded[1], VoiceMailLite[2], VoiceMailPro[3], Audix[4]}	voice mail configured for this system
1, E		#	Mailboxes	List		voice mail other than Audix configured for this system
1.0.0, E	# VoiceMailBoxInfo	VoiceMailBoxLink		
1.1.0, E	# VoiceMailBoxInfo	VoiceMailBoxLink		
1.2.0, E	# VoiceMailBoxInfo	VoiceMailBoxLink		
2, E		#	ActiveVoiceMailPorts	List		
2.0, E	#	ActiveVoiceMailPort	Key	One entry will be present per channel in use	
2.0.0, R, sw.19.0.8.0	#	Call	CallRef		
2.1.0, R, sw.19.0.9.0	#	Call	CallRef		
2.2.0, R, sw.19.0.10.0	#	Call	CallRef		
2.3.0, R, sw.19.0.11.0	#	Call	CallRef		
2.4.0, R, sw.19.0.13.0	#	Call	CallRef		
2.5.0, R, sw.19.0.19.0	#	Call	CallRef		
5, E	#	StorageSpaceAlarm	StorageAlarmObject	alarm of type serviceAlarm
				
[sw.16.1.0.0]
# vmb	VoiceMailBox	Object 0
0, S, Box1	#	Name	String	Mailboxes are associated with user/group names, not numbers	
1, E	#	Enabled	Existence	Setting from voicemail tab of user/huntgroup	Manager setting for mailbox is On
2, C, 1	#	Broadcast	OffOnEnumeration	Setting from voicemail tab of huntgroup	Mailbox is for a huntgroup
3, C, 3	#	EmailMode	VMEmailMode Enumeration	{Off[1], Alert[2], Copy[3], forward[4]}	
4, S, box1@avaya.com	#	EmailAddress	String		configured in Manager
5, E	#	EmailReading	Existence		User mailbox with option enabled in Manager
6, C, 1	#	NumberNewMessages	Cardinal		
7, C, 2 #	NumberSavedMessages	Cardinal		
8, C, 3	#	NumberOldMessages	Cardinal		

[sw.16.1.1.0]
# vmb	VoiceMailBox	Object 1
0, S, BoxTwo	#	Name	String	Mailboxes are associated with user/group names, not numbers	
2, C, 2	#	Broadcast	OffOnEnumeration	Setting from voicemail tab of huntgroup	Mailbox is for a huntgroup
3, C, 1	#	EmailMode	VMEmailMode Enumeration	{Off[1], Alert[2], Copy[3], forward[4]}	
6, C, 0	#	NumberNewMessages	Cardinal		

[sw.16.1.2.0]
# vmb	VoiceMailBox	Object 2
0, S, MailboxTheThird	#	Name	String	Mailboxes are associated with user/group names, not numbers	
3, C, 2	#	EmailMode	VMEmailMode Enumeration	{Off[1], Alert[2], Copy[3], forward[4]}	
4, S, box3@avaya.com	#	EmailAddress	String		configured in Manager
6, C, 0	#	NumberNewMessages	Cardinal		
7, C, 0 #	NumberSavedMessages	Cardinal		
8, C, 0	#	NumberOldMessages	Cardinal		

[sw.16.5]
# Voicemail Storage Alarm
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 3	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, C, 2	#	StorageStatus Enumeration StorageNearlyFull[2]

[sw.16.6]
# Voicemail UpDown
0, E		# UpDownHistory
1, E			# Initialising
1.0, E	# DownAlarm
1.0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
1.0.1, C, 1	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
1.0.2, E		#	Current	Existence Alarm condition is still present
1.0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null

[sw.18]
0, E	#	AccessRecords	List		
0.1.0, A, 03/15/2007_01:00:01  # 	AccessTime	AbsoluteTime		
0.1.1, S, Steffen		#	SwitchAccount	String	UserId specified when trying to access the switch	
0.1.2, I, 135.124.66.92		#	ManagerIPAddress	IPAddress	IP Address of the machine on which Manager was run	
0.1.3, M, 206249443862	#	ManagerMACAddress	MACAddress	MAC Address of the machine on which Manager was run	
0.1.4, S, brs2fr	#	HostLogin	String	UserId specified when logging into the machine on which Manager was run	
0.1.5, C, 1		#	SwitchAccessType	SwitchAccessType Enumeration	{WriteMerge[1], WriteImmedReboot[2], WriteRebootWhenFree[3], WriteTimedReboot[4], Reboot[5], SoftwareUpgrade[6], ConfigErased[7], WarmStart[8], Coldstart[9]}	
#0.i.6	RebootTime	AbsoluteTime		SwitchAccessType is WriteTimedReboot
0.1.7, C, 2		#	Result	AuditTrailResult Enumeration	{Failure[1], SuccessWithErrors[2], Success[3]}	
0.1.8.1.0, C, 1	#	FormChanged	ManagerForm Enumeration	{System[1], Line[2], Extension[3], User[4], HuntGroup[5], ShortCode[6], Service[7], RAS[8], IncomingCallRoute[9], WANPort[10], Directory[11], TimeProfile[12], Firewall[13], IPRoute[14], ARS[15], License[16], AcctCode[17], Wireless[18], UserRights[19], LogicalLAN[20], Tunnel[21], AutoAtt[22], E911[23]}	
#0.i.8.i.1	ItemChanged	String	The Line/Extension/User/Huntgroup/ Shortcode that was changed	A single Line/Extension/User/ Huntgroup/Shortcode was changed
#0.i.8.i.2	MultipleChanges	Existence	[This field applies only to Line/Extension/User/Huntgroup/Shortcode changes]	Multiple Line/Extension/User/ Huntgroup/Shortcode changes
0.2.0, A, 03/15/2007_02:00:02  # 	AccessTime	AbsoluteTime		
0.2.1, S, Steffen		#	SwitchAccount	String	UserId specified when trying to access the switch	
0.2.2, I, 135.124.66.92		#	ManagerIPAddress	IPAddress	IP Address of the machine on which Manager was run	
0.2.3, M, 206249443862	#	ManagerMACAddress	MACAddress	MAC Address of the machine on which Manager was run	
0.2.4, S, brs2fr	#	HostLogin	String	UserId specified when logging into the machine on which Manager was run	
0.2.5, C, 2		#	SwitchAccessType	SwitchAccessType Enumeration	{WriteMerge[1], WriteImmedReboot[2], WriteRebootWhenFree[3], WriteTimedReboot[4], Reboot[5], SoftwareUpgrade[6], ConfigErased[7], WarmStart[8], Coldstart[9]}	
0.2.7, C, 3		#	Result	AuditTrailResult Enumeration	{Failure[1], SuccessWithErrors[2], Success[3]}	
0.2.8.1.0, C, 2	#	FormChanged	ManagerForm Enumeration	{System[1], Line[2], Extension[3], User[4], HuntGroup[5], ShortCode[6], Service[7], RAS[8], IncomingCallRoute[9], WANPort[10], Directory[11], TimeProfile[12], Firewall[13], IPRoute[14], ARS[15], License[16], AcctCode[17], Wireless[18], UserRights[19], LogicalLAN[20], Tunnel[21], AutoAtt[22], E911[23]}	
0.2.8.1.2, E	#	MultipleChanges	Existence	[This field applies only to Line/Extension/User/Huntgroup/Shortcode changes]	Multiple Line/Extension/User/ Huntgroup/Shortcode changes
0.2.8.2.0, C, 3	#	FormChanged	ManagerForm Enumeration	{System[1], Line[2], Extension[3], User[4], HuntGroup[5], ShortCode[6], Service[7], RAS[8], IncomingCallRoute[9], WANPort[10], Directory[11], TimeProfile[12], Firewall[13], IPRoute[14], ARS[15], License[16], AcctCode[17], Wireless[18], UserRights[19], LogicalLAN[20], Tunnel[21], AutoAtt[22], E911[23]}	
0.2.8.2.1, S, Extn1222	#	ItemChanged	String	The Line/Extension/User/Huntgroup/ Shortcode that was changed	A single Line/Extension/User/ Huntgroup/Shortcode was changed
0.2.8.3.0, C, 7	#	FormChanged	ManagerForm Enumeration	{System[1], Line[2], Extension[3], User[4], HuntGroup[5], ShortCode[6], Service[7], RAS[8], IncomingCallRoute[9], WANPort[10], Directory[11], TimeProfile[12], Firewall[13], IPRoute[14], ARS[15], License[16], AcctCode[17], Wireless[18], UserRights[19], LogicalLAN[20], Tunnel[21], AutoAtt[22], E911[23]}	
0.3.0, A, 03/15/2007_03:00:03  # 	AccessTime	AbsoluteTime		
0.3.1, S, Administrator		#	SwitchAccount	String	UserId specified when trying to access the switch	
0.4.0, A, 03/15/2007_04:00:04  # 	AccessTime	AbsoluteTime		
0.4.1, S, Falsch		#	SwitchAccount	String	UserId specified when trying to access the switch	
0.4.2, I, 135.124.66.92		#	ManagerIPAddress	IPAddress	IP Address of the machine on which Manager was run	
0.4.3, M, 206249443862	#	ManagerMACAddress	MACAddress	MAC Address of the machine on which Manager was run	
0.4.4, S, brs2fr	#	HostLogin	String	UserId specified when logging into the machine on which Manager was run	
0.4.7, C, 1		#	Result	AuditTrailResult Enumeration	{Failure[1], SuccessWithErrors[2], Success[3]}	
0.5.0, A, 03/15/2007_05:00:05  # 	AccessTime	AbsoluteTime		
0.5.1, S, Steffen		#	SwitchAccount	String	UserId specified when trying to access the switch	
0.5.2, I, 135.124.66.92		#	ManagerIPAddress	IPAddress	IP Address of the machine on which Manager was run	
0.5.3, M, 206249443862	#	ManagerMACAddress	MACAddress	MAC Address of the machine on which Manager was run	
0.5.4, S, brs2fr	#	HostLogin	String	UserId specified when logging into the machine on which Manager was run	
0.5.5, C, 4		#	SwitchAccessType	SwitchAccessType Enumeration	{WriteMerge[1], WriteImmedReboot[2], WriteRebootWhenFree[3], WriteTimedReboot[4], Reboot[5], SoftwareUpgrade[6], ConfigErased[7], WarmStart[8], Coldstart[9]}	
0.5.7, C, 2		#	Result	AuditTrailResult Enumeration	{Failure[1], SuccessWithErrors[2], Success[3]}	
0.5.6, A, 03/15/2007_05:10:00	#	RebootTime	AbsoluteTime		SwitchAccessType is WriteTimedReboot
0.5.8.1.0, C, 4	#	FormChanged	ManagerForm Enumeration	{System[1], Line[2], Extension[3], User[4], HuntGroup[5], ShortCode[6], Service[7], RAS[8], IncomingCallRoute[9], WANPort[10], Directory[11], TimeProfile[12], Firewall[13], IPRoute[14], ARS[15], License[16], AcctCode[17], Wireless[18], UserRights[19], LogicalLAN[20], Tunnel[21], AutoAtt[22], E911[23]}	
0.5.8.1.2, E	#	MultipleChanges	Existence	[This field applies only to Line/Extension/User/Huntgroup/Shortcode changes]	Multiple Line/Extension/User/ Huntgroup/Shortcode changes
0.5.8.2.0, C, 23	#	FormChanged	ManagerForm Enumeration	{System[1], Line[2], Extension[3], User[4], HuntGroup[5], ShortCode[6], Service[7], RAS[8], IncomingCallRoute[9], WANPort[10], Directory[11], TimeProfile[12], Firewall[13], IPRoute[14], ARS[15], License[16], AcctCode[17], Wireless[18], UserRights[19], LogicalLAN[20], Tunnel[21], AutoAtt[22], E911[23]}	

[sw.19.0.1.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0.0, C, 1		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
0.1, E		#	TrunkList	List	list of 1 or more Trunk entries, allowing SCN (paging calls and) group rings to be represented  max 1 entry for IEnd	
0.1.2.0, R, sw.0.9.6.14.1.0	#	TrunkChannel	FieldIdentifier	identifies the {trunk, channel}, or trunk only for held-at-CO calls	EndType = Trunk, Paging or TargetList
0.1.2.1, E	#	RTPQoSLink	provides jitter / round trip / packet loss information, this trunk is a VoIP trunk and call is using a VCM for this end
0.8, C, 16		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
0.9, C, 1	#	CodecSetting	VoIPCompression Enumeration	{Auto[1], 64transparent[2], G711A[3], G711Mu[4], G729A[5], G729simple[6], ADPCM32[7], ADPCM16[8], Netcoder8[9], G7231[10]}	call is in connected state; End is VoIP [Auto not applicable for this field]
0.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
1, E	# Rend	CallEndObject	REnd is a normally the recipient of the call; the REnd may describe multiple endpoints, e.g. in the case of a group ring call  
1.0, C, 8		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
1.1.0.0, R, sw.0.1.6.14.9.0	#	TrunkChannel	FieldIdentifier	identifies the {trunk, channel}, or trunk only for held-at-CO calls	EndType = Trunk, Paging or TargetList
1.1.1.0, R, sw.0.2.7.9.0.14.1.0	#	TrunkChannel	FieldIdentifier	identifies the {trunk, channel}, or trunk only for held-at-CO calls	EndType = Trunk, Paging or TargetList
1.2, E	#	UserList	List	list of 1 or more User entries, allowing paging calls, group rings to be represented  max 1 entry for IEnd	EndType = User, VoiceMailBox, Paging or TargetList
1.2.0.0, K, 701	#	UserNumber	KeypadSequence	identifies a user or group by number	Party/target is User, Queue or VoiceMailBox (may be a group in the case of VoiceMailBox or Queue)
1.2.0.1, S, Seven-O-One	#	UserName	String	identifies a user or group by name	
1.2.1.0, K, 601	#	UserNumber	KeypadSequence	identifies a user or group by number	Party/target is User, Queue or VoiceMailBox (may be a group in the case of VoiceMailBox or Queue)
1.2.1.1, S, Six-O-One	#	UserName	String	identifies a user or group by name	
1.2.1.2, C, 1		#	Button	Cardinal	each call on a multi-line set must be associated with a button; button numbering will match phone set/manager documentation	Party/target is a User whose extension is a multi-line set
1.2.1.3, C, 1		#	ButtonType	KLPButtonType Enumeration	{CA[1], LA[2], BA[3], CC[4]}	
1.2.2.0, K, 1101	#	UserNumber	KeypadSequence	identifies a user or group by number	Party/target is User, Queue or VoiceMailBox (may be a group in the case of VoiceMailBox or Queue)
1.8, C, 8		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
1.9, C, 2	#	CodecSetting	VoIPCompression Enumeration	{Auto[1], 64transparent[2], G711A[3], G711Mu[4], G729A[5], G729simple[6], ADPCM32[7], ADPCM16[8], Netcoder8[9], G7231[10]}	call is in connected state; End is VoIP [Auto not applicable for this field]
1.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
#2	RTPConnectionType	RTPConnectionType Enumeration	{DirectMedia[1], RTPRelay[2], VCMs[3]}
#3	NumberDialled	KeypadSequence	The sequence of digits dialled on the extension
4, K, 200		# DDI	KeypadSequence	[aka DID or MSN] The called number presented for a call originating from a trunk
5, K, 0815		#	CallerID	KeypadSequence	The calling party number presented with a call originating from a trunk
#6, S, "Caller 1"		#	CallerName	String	The calling party name presented with a call originating from a trunk
#7, K, 2222	#	ConnectedID	KeypadSequence	The connected party number reported by a trunk for an outgoing connected call
9, E	#	CallRoutingInfo	CallRoutingInfoLink	More details on the history of this call
#ca.10	CallSupplementaryInfo	CallSupplInfoLink	Supplementary information for Devlink
#ca.11	CallRecording	Existence	
#ca.12	Trace	TraceEventLink	Provides events relating to this call and its parties
13, C, 11		#	Call ID	Cardinal	Unique CM number for this call
#ca.14	OriginalCallID	Cardinal	Original Call ID associated with the call object
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 
#ca.16	ClearCall	Command	Clears call, plus associated calls in the case of a conference that is not of type Power Conference; ReturnValues is Null
[sw.19.0.1.0.0.1.2.1]
0, C, 11	#	RoundTripDelay	round trip delay as defined in RFC 1889, in microseconds
1, C, 22	#	ReceiveJitter	jitter as defined in RFC 1889, in microseconds
2, C, 33	#	ReceivePacketLoss	Fraction	as defined in RFC1889, expressed as a fraction in ten-thousandths
3, C, 44	#	TransmitJitter	jitter as defined in RFC 1889, in microseconds
4, C, 55	#	TransmitPacketLoss	Fraction	as defined in RFC1889, expressed as a fraction in ten-thousandths
[sw.19.0.1.0.9]
2, S, Main	# FirstGroupTarget

[sw.19.0.2.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0.0, C, 2		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
0.2.0.0, K, 702	#	UserNumber	KeypadSequence	identifies a user or group by number	Party/target is User, Queue or VoiceMailBox (may be a group in the case of VoiceMailBox or Queue)
0.2.0.1, S, Seven-O-Two	#	UserName	String	identifies a user or group by name	
0.8, C, 16		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
0.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
1, E	# Rend	CallEndObject	REnd is a normally the recipient of the call; the REnd may describe multiple endpoints, e.g. in the case of a group ring call  
1.0, C, 8		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
1.1, E		#	TrunkList	List	list of 1 or more Trunk entries, allowing SCN (paging calls and) group rings to be represented  max 1 entry for IEnd	
1.1.1.0, R, sw.0.2.7.9.0.14.2.0	#	TrunkGroup	FieldIdentifier	identifies the {trunk, channel}, or trunk only for held-at-CO calls	EndType = Trunk, Paging or TargetList
1.1.2.0, R, sw.0.9.6.14.2.0	#	TrunkChannel	FieldIdentifier	identifies the {trunk, channel}, or trunk only for held-at-CO calls	EndType = Trunk, Paging or TargetList
1.1.3.0, R, sw.0.1.6.14.10.0	#	TrunkChannel	FieldIdentifier	identifies the {trunk, channel}, or trunk only for held-at-CO calls	EndType = Trunk, Paging or TargetList
1.1.4.0, R, sw.0.10.6.14.1.0	#	TrunkChannel	FieldIdentifier	identifies the {trunk, channel}, or trunk only for held-at-CO calls	EndType = Trunk, Paging or TargetList
1.1.4.2, C, 1	#	URIGroup	the URI group through which this CallEnd was processed  (this trunk is a SIP trunk)
1.8, C, 8		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
1.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
9, E	# CallRoutingInfo
13, C, 102		#	Call ID	Cardinal	Unique CM number for this call
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 
[sw.19.0.2.0.9]
4, C, 5	# FirstShortCodeSource
5, S, 6N	# FirstShortCodeMatched
6, C, 39	# FirstShortCodeFeature
7, C, 7	# FirstShortCodeOGG
15, C, 0	# RetargettingCount

[sw.19.0.3.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0.0, C, 2		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
0.2.0.0, K, 602	# User Number
0.2.0.1, S, Six-O-Two	# User Name
0.8, C, 2		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
0.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
1, E
1.0, C, 6	# ParkSlot
1.6, S, 602
1.8, C, 2
1.10, T, 0
13, C, 103		#	Call ID	Cardinal	Unique CM number for this call
14, C, 13		#	OriginalCallID	Cardinal	Original Call ID associated with the call object
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 

[sw.19.0.4.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0.0, C, 2		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
0.2.0.0, K, 101	# User Number
0.8, C, 2		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
0.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
1, E
1.0, C, 7
1.7, R, sw.21.0.0		# Conference Id
1.8, C, 2
1.10, T, 0
13, C, 104		#	Call ID	Cardinal	Unique CM number for this call
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 

[sw.19.0.5.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0.0, C, 2		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
0.2.0.0, K, 102	# User Number
0.2.0.1, S, OneHundertTwo	# User Number
0.8, C, 2		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
0.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
1, E
1.0, C, 7
1.7, R, sw.21.0.0		# Conference Id
1.8, C, 2
1.10, T, 0
13, C, 105		#	Call ID	Cardinal	Unique CM number for this call
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 

[sw.19.0.6.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0.0, C, 7
0.7, R, sw.21.0.0		# Conference Id
0.8, C, 2
0.10, T, 0
1, E
1.0, C, 2		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
1.2.0.0, K, 130	# User Number
1.2.0.1, S, OneHundertThirty	# User Number
1.8, C, 2		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
1.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
11, E		# Call Recording
13, C, 106		#	Call ID	Cardinal	Unique CM number for this call
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 

[sw.19.0.7.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0.0, C, 3
0.3, S, dialout
0.8, C, 9
0.10, T, 0
13, C, 107		#	Call ID	Cardinal	Unique CM number for this call
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 

[sw.19.0.8.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0.0, C, 2		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
0.2.0.0, K, 103	# User Number
0.8, C, 2		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
0.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
1, E
1.0, C, 4	# VoiceMailCallFlow
1.5, S, 603
1.8, C, 2
1.10, T, 0
13, C, 108		#	Call ID	Cardinal	Unique CM number for this call
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 

[sw.19.0.9.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0.0, C, 2		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
0.2.0.0, K, 104	# User Number
0.8, C, 2		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
0.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
1, E
1.0, C, 5 # VoiceMailBox
1.8, C, 26
1.10, T, 0
1.14, S, ?101	
13, C, 109		#	Call ID	Cardinal	Unique CM number for this call
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 

[sw.19.0.10.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0.0, C, 2		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
0.2.0.0, K, 105	# User Number
0.8, C, 2		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
0.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
1, E
1.0, C, 10
1.4, S, blabla
1.8, C, 2
1.10, T, 0
13, C, 110		#	Call ID	Cardinal	Unique CM number for this call
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 

[sw.19.0.11.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0.0, C, 2		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
0.2.0.0, K, 106	# User Number
0.8, C, 2		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
0.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
1, E
1.0, C, 11
1.8, C, 25
1.10, T, 0
1.12, K, 200	# Queue Number
1.13, S, Main	
1.15, S, WelcomeText
1.16, C, 2
13, C, 111		#	Call ID	Cardinal	Unique CM number for this call
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 

[sw.19.0.12.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0.0, C, 2		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
0.2.0.0, K, 107	# User Number
0.8, C, 2		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
0.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
1, E
1.0, C, 9
1.2.0.0, K, 110	# User Number
1.2.1.0, K, 111	# User Number
1.2.2.0, K, 112	# User Number
1.8, C, 2
1.10, T, 0
13, C, 112		#	Call ID	Cardinal	Unique CM number for this call
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 

[sw.19.0.13.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0.0, C, 13		#	EndType =	Multicast
1, E
1.0, C, 14	# EndType = Announcement
1.8, C, 27	# EndState = waitingAnnoucement
1.10, T, 0
1.15, S, YouHaveToWaitText
1.16, C, 1
13, C, 113		#	Call ID	Cardinal	Unique CM number for this call
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 

[sw.19.0.14.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0.0, C, 2		#	EndType	= User
0.2.0.0, K, 108	# User Number
0.8, C, 2		# 	EndState = connected
0.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
1, E
1.0, C, 8	# EndType = TargetList
1.2.0.0, K, 120	# User Number
1.8, C, 24	# State = alertingAnnouncement
1.10, T, 0
1.11, R, sw.19.0.13.0
13, C, 114		#	Call ID	Cardinal	Unique CM number for this call
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 

[sw.19.0.15.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0.0, C, 1		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
0.1, E		#	TrunkList	List	list of 1 or more Trunk entries, allowing SCN (paging calls and) group rings to be represented  max 1 entry for IEnd	
0.1.2.0, R, sw.0.1.6.14.12.0	#	TrunkChannel	FieldIdentifier	identifies the {trunk, channel}, or trunk only for held-at-CO calls	EndType = Trunk, Paging or TargetList
0.8, C, 2		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
0.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
1, E	# Rend	CallEndObject	REnd is a normally the recipient of the call; the REnd may describe multiple endpoints, e.g. in the case of a group ring call  
1.0, C, 8		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
1.2, E	#	UserList	List	list of 1 or more User entries, allowing paging calls, group rings to be represented  max 1 entry for IEnd	EndType = User, VoiceMailBox, Paging or TargetList
1.2.0.0, K, 109	#	UserNumber	KeypadSequence	identifies a user or group by number	Party/target is User, Queue or VoiceMailBox (may be a group in the case of VoiceMailBox or Queue)
1.2.0.1, S, OneHundertNine	#	UserName	String	identifies a user or group by name	
1.8, C, 24		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
1.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
1.11, R, sw.19.0.13.0
13, C, 115		#	Call ID	Cardinal	Unique CM number for this call
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 

[sw.19.0.16.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0.0, C, 1		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
0.1, E		#	TrunkList	List	list of 1 or more Trunk entries, allowing SCN (paging calls and) group rings to be represented  max 1 entry for IEnd	
0.1.2.0, R, sw.0.2.7.10.0.14.1.0	#	TrunkChannel	FieldIdentifier	identifies the {trunk, channel}, or trunk only for held-at-CO calls	EndType = Trunk, Paging or TargetList
0.8, C, 2		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
0.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
1, E	# Rend	CallEndObject	REnd is a normally the recipient of the call; the REnd may describe multiple endpoints, e.g. in the case of a group ring call  
1.0, C, 8		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
1.2, E	#	UserList	List	list of 1 or more User entries, allowing paging calls, group rings to be represented  max 1 entry for IEnd	EndType = User, VoiceMailBox, Paging or TargetList
1.2.0.0, K, 110	#	UserNumber	KeypadSequence	identifies a user or group by number	Party/target is User, Queue or VoiceMailBox (may be a group in the case of VoiceMailBox or Queue)
1.2.0.1, S, OneHundertTen	#	UserName	String	identifies a user or group by name	
1.8, C, 24		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
1.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
1.11, R, sw.19.0.13.0
13, C, 116		#	Call ID	Cardinal	Unique CM number for this call
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 

[sw.19.0.17.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0.0, C, 1		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
0.1, E		#	TrunkList	List	list of 1 or more Trunk entries, allowing SCN (paging calls and) group rings to be represented  max 1 entry for IEnd	
0.1.2.0, R, sw.0.10.6.14.3.0	#	TrunkChannel	FieldIdentifier	identifies the {trunk, channel}, or trunk only for held-at-CO calls	EndType = Trunk, Paging or TargetList
0.8, C, 2		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
0.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
1, E	# Rend	CallEndObject	REnd is a normally the recipient of the call; the REnd may describe multiple endpoints, e.g. in the case of a group ring call  
1.0, C, 8		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
1.2, E	#	UserList	List	list of 1 or more User entries, allowing paging calls, group rings to be represented  max 1 entry for IEnd	EndType = User, VoiceMailBox, Paging or TargetList
1.2.0.0, K, 111	#	UserNumber	KeypadSequence	identifies a user or group by number	Party/target is User, Queue or VoiceMailBox (may be a group in the case of VoiceMailBox or Queue)
1.2.0.1, S, OneHundertEleven	#	UserName	String	identifies a user or group by name	
1.8, C, 24		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
1.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
1.11, R, sw.19.0.13.0
13, C, 117		#	Call ID	Cardinal	Unique CM number for this call
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 

[sw.19.0.18.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0.0, C, 4		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
0.8, C, 2		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
0.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
1, E	# Rend	CallEndObject	REnd is a normally the recipient of the call; the REnd may describe multiple endpoints, e.g. in the case of a group ring call  
1.0, C, 2		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
1.2, E	#	UserList	List	list of 1 or more User entries, allowing paging calls, group rings to be represented  max 1 entry for IEnd	EndType = User, VoiceMailBox, Paging or TargetList
1.2.0.0, K, 112	#	UserNumber	KeypadSequence	identifies a user or group by number	Party/target is User, Queue or VoiceMailBox (may be a group in the case of VoiceMailBox or Queue)
1.2.0.1, S, OneHundertTwelve	#	UserName	String	identifies a user or group by name	
1.8, C, 2		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
1.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
13, C, 118		#	Call ID	Cardinal	Unique CM number for this call
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 

[sw.19.0.19.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0.0, C, 12	# EndType = Call
0.8, C, 14	# EndState = Recording
0.10, T, 0
0.11, R, sw.19.0.6.0
1, E
1.0, C, 5		#	EndType	= VoiceMailBox[5]
1.8, C, 2		# EndState = connected
1.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
1.14, S, AutoRecord
13, C, 119		#	Call ID	Cardinal	Unique CM number for this call
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 

[sw.19.0.20.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0.0, C, 2	# EndType = User
0.2, E	#	UserList	List	list of 1 or more User entries, allowing paging calls, group rings to be represented  max 1 entry for IEnd	EndType = User, VoiceMailBox, Paging or TargetList
0.2.0.0, K, 1401	#	UserNumber	KeypadSequence	identifies a user or group by number	Party/target is User, Queue or VoiceMailBox (may be a group in the case of VoiceMailBox or Queue)
0.2.0.1, S, Telecommuter 1	#	UserName	String	identifies a user or group by name	
0.2.0.4, R, sw.0.10.6.14.4.0	# Telecommuter Trunk
0.2.0.5, C, 9	# Telecommuter URI Group
0.8, C, 5	# EndState = TestCall
0.10, T, 0
13, C, 120		#	Call ID	Cardinal	Unique CM number for this call
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 

[sw.19.0.21.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0.0, C, 15	# EndType = TelecommuterHelper
0.2, E	#	UserList	List	list of 1 or more User entries, allowing paging calls, group rings to be represented  max 1 entry for IEnd	EndType = User, VoiceMailBox, Paging or TargetList
0.2.0.0, K, 1401	#	UserNumber	KeypadSequence	identifies a user or group by number	Party/target is User, Queue or VoiceMailBox (may be a group in the case of VoiceMailBox or Queue)
0.2.0.1, S, Telecommuter 1	#	UserName	String	identifies a user or group by name	
0.10, T, 0
13, C, 121		#	Call ID	Cardinal	Unique CM number for this call
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 
1, E	# Rend	CallEndObject	REnd is a normally the recipient of the call; the REnd may describe multiple endpoints, e.g. in the case of a group ring call  
1.0, C, 1		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
1.1, E		#	TrunkList	List	list of 1 or more Trunk entries, allowing SCN (paging calls and) group rings to be represented  max 1 entry for IEnd	
1.1.2.0, R, sw.0.10.6.14.4.0	#	TrunkChannel	FieldIdentifier	identifies the {trunk, channel}, or trunk only for held-at-CO calls	EndType = Trunk, Paging or TargetList
1.1.2.1, E		#	QoS
1.1.2.2, C, 9	#	URI Group
1.8, C, 2		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
1.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
[sw.19.0.21.0.1.1.2.1]
0, C, 55555
1, C, 666666
2, C, 7777777
3, C, 88888888
4, C, 999999999

[sw.19.0.22.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0, E	# Rend	CallEndObject	REnd is a normally the recipient of the call; the REnd may describe multiple endpoints, e.g. in the case of a group ring call  
0.0, C, 2		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
0.2, E	#	UserList	List	list of 1 or more User entries, allowing paging calls, group rings to be represented  max 1 entry for IEnd	EndType = User, VoiceMailBox, Paging or TargetList
0.2.0.0, K, 113	#	UserNumber	KeypadSequence	identifies a user or group by number	Party/target is User, Queue or VoiceMailBox (may be a group in the case of VoiceMailBox or Queue)
0.2.0.1, S, Scary	#	UserName
0.8, C, 16		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
0.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
1.0, C, 8	# EndType = TargetList
1.1, E		#	TrunkList	List	list of 1 or more Trunk entries, allowing SCN (paging calls and) group rings to be represented  max 1 entry for IEnd	
1.1.1.0, R, sw.0.15.6.14.1.0	#	TrunkChannel	FieldIdentifier	identifies the {trunk, channel}, or trunk only for held-at-CO calls	EndType = Trunk, Paging or TargetList
#1.1.1.2, C, 15	# URI group (should not displayed for SES Trunk)
1.2, E	#	UserList	List	list of 1 or more User entries, allowing paging calls, group rings to be represented  max 1 entry for IEnd	EndType = User, VoiceMailBox, Paging or TargetList
1.2.1.0, K, 1101	#	UserNumber	KeypadSequence	identifies a user or group by number	Party/target is User, Queue or VoiceMailBox (may be a group in the case of VoiceMailBox or Queue)
1.2.1.1, S, Eleven-O-One	#	UserName	String	identifies a user or group by name	
1.2.2.0, K, 1101	#	UserNumber	KeypadSequence	identifies a user or group by number	Party/target is User, Queue or VoiceMailBox (may be a group in the case of VoiceMailBox or Queue)
1.2.2.1, S, Eleven-O-One	#	UserName	String	identifies a user or group by name	
1.2.2.4, R, sw.0.2.7.10.0.14.3.0	# Trunk to Twin
1.2.2.6, C, 2
1.2.3.0, K, 114	#	UserNumber	KeypadSequence	identifies a user or group by number	Party/target is User, Queue or VoiceMailBox (may be a group in the case of VoiceMailBox or Queue)
1.2.3.1, S, Extn114	#	UserName	String	identifies a user or group by name	
1.8, C, 8	# EndState = alerting
1.10, T, 0
13, C, 122		#	Call ID	Cardinal	Unique CM number for this call
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 

[sw.19.0.23.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0.0, C, 16	# EndType = TelecommuterHelper
0.2, E	#	UserList	List	list of 1 or more User entries, allowing paging calls, group rings to be represented  max 1 entry for IEnd	EndType = User, VoiceMailBox, Paging or TargetList
0.2.0.0, K, 1101	#	UserNumber	KeypadSequence	identifies a user or group by number	Party/target is User, Queue or VoiceMailBox (may be a group in the case of VoiceMailBox or Queue)
0.2.0.1, S, Eleven-O-One	#	UserName	String	identifies a user or group by name	
0.10, T, 0
1, E	# Rend	CallEndObject	REnd is a normally the recipient of the call; the REnd may describe multiple endpoints, e.g. in the case of a group ring call  
1.0, C, 1		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
1.1, E		#	TrunkList	List	list of 1 or more Trunk entries, allowing SCN (paging calls and) group rings to be represented  max 1 entry for IEnd	
1.1.2.0, R, sw.0.2.7.10.0.14.3.0	#	TrunkChannel	FieldIdentifier	identifies the {trunk, channel}, or trunk only for held-at-CO calls	EndType = Trunk, Paging or TargetList
1.8, C, 2		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
1.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
13, C, 123		#	Call ID	Cardinal	Unique CM number for this call
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 

[sw.20]
0.0.0, R, sw.19.0.1.0		# Hence the type of this field is CallRef
0.1.0, R, sw.19.0.2.0		# Hence the type of this field is CallRef
0.2.0, R, sw.19.0.3.0		# Hence the type of this field is CallRef
0.3.0, R, sw.19.0.4.0		# Hence the type of this field is CallRef
0.4.0, R, sw.19.0.5.0		# Hence the type of this field is CallRef
0.5.0, R, sw.19.0.6.0		# Hence the type of this field is CallRef
0.6.0, R, sw.19.0.7.0		# Hence the type of this field is CallRef
0.7.0, R, sw.19.0.8.0		# Hence the type of this field is CallRef
0.8.0, R, sw.19.0.9.0		# Hence the type of this field is CallRef
0.9.0, R, sw.19.0.10.0		# Hence the type of this field is CallRef
0.10.0, R, sw.19.0.11.0		# Hence the type of this field is CallRef
0.11.0, R, sw.19.0.12.0		# Hence the type of this field is CallRef
0.12.0, R, sw.19.0.13.0		# Hence the type of this field is CallRef
0.13.0, R, sw.19.0.14.0		# Hence the type of this field is CallRef
0.14.0, R, sw.19.0.15.0		# Hence the type of this field is CallRef
0.15.0, R, sw.19.0.16.0		# Hence the type of this field is CallRef
0.16.0, R, sw.19.0.17.0		# Hence the type of this field is CallRef
0.17.0, R, sw.19.0.18.0		# Hence the type of this field is CallRef
0.18.0, R, sw.19.0.19.0		# Hence the type of this field is CallRef
0.19.0, R, sw.19.0.20.0		# Hence the type of this field is CallRef
0.20.0, R, sw.19.0.21.0		# Hence the type of this field is CallRef
0.21.0, R, sw.19.0.22.0		# Hence the type of this field is CallRef
0.22.0, R, sw.19.0.23.0		# Hence the type of this field is CallRef

[sw.21]
0.0.0, S, 100		# Conference name
0.0.1, E

[sw.21.0.0.1]
0, C, 1		# Conference type MeetMe[1]
1.0.0, R, sw.19.0.4.0
1.1.0, R, sw.19.0.5.0

[sw.30]
# SSIStats
0, C, 0
1, C, 0
2, C, 0
3, C, 0
