#
# Test Data
#
# Format: Identifer, Type, Value
#                    S =>  Value is SSIString
#                    C =>  Value is Cardinal
#                    E =>  Existence (no value)
#                    A =>  Value is AbsoluteTime ("mm/dd/yyyy_hh:mm:ss" - may be <start> = start date/time of SSA simulator)
#                    I =>  Value is IPAddress
#                    T =>  Value is SwitchTime
#                    K =>  Value is KeypadSequence
#										 R =>  Value is Identifier
#										 M =>  Value is MACAddress

[sw]
# ExpansionModule DS30V1 
0.3.0, E					#	ExpansionModule		Existence		
0.3.0.0, C, 1			#	ModuleNumber	Cardinal 	Range 1-12
0.3.0.1, E, 			#	LoadableModuleInfo	Existence		an expansion module is currently connected to this port
0.3.0.1.0, C, 1  	#	ModuleType 	ModuleTypeEnum	{DS30V1[1]}
0.3.0.1.1, C, 4  	#	FirmwareMajorVersion 	Cardinal 	Firmware versions are structured as MajorRelease.MinorRelease(BuildNumber)
0.3.0.1.2, C, 0  	#	FirmwareMinorVersion 	Cardinal
0.3.0.1.3, C, 99	#	FirmwareBuildVersion 	Cardinal
0.3.8, E					# Extension Group
# ExpansionModule DT30
0.4.0, E					#	ExpansionModule		Existence		
0.4.0.0, C, 2			#	ModuleNumber	Range 1-12
0.4.0.1, E, 			#	LoadableModuleInfo	Existence		an expansion module is currently connected to this port
0.4.0.1.0, C, 5  	#	ModuleType 	ModuleTypeEnum		{DT30[5]}
0.4.0.1.1, C, 4  	#	FirmwareMajorVersion 	Cardinal 	Firmware versions are structured as MajorRelease.MinorRelease(BuildNumber)
0.4.0.1.2, C, 0  	#	FirmwareMinorVersion 	Cardinal
0.4.0.1.3, C, 98 	#	FirmwareBuildVersion 	Cardinal
# WAN3Module
0.5.1, E								#	WAN3Module	Existence		
0.5.1.0, I, 143.1.10.16	#	Address		IPAddress		base unit is in contact with WAN3 
0.5.1.1, E, 						#	LoadableModuleInfo	Existence		base unit supports WAN3 module
0.5.1.1.1, C, 4  				#	FirmwareMajorVersion 	Firmware versions are structured as MajorRelease.MinorRelease(BuildNumber)
0.5.1.1.2, C, 0  				#	FirmwareMinorVersion 	Cardinal 
0.5.1.1.3, C, 97 				#	FirmwareBuildVersion 	Cardinal 
0.5.10, E								#	ModuleFailureInfo	Alarm is present, applies only to expansion modules; classified as a linkAlarm		
# VoipGroup H323Trunks
0.9.4, E							#	VoIpGroup	Existence	group is VoIP trunk or extension group
0.9.4.0, C, 4					#	IpGroupType Enumeration	IpGroupTypeEnum	{AvayaPhones[1], OpenH323Phones[2], DectPhones[3], H323Trunk[4], SIPTrunk[5]} 
0.9.4.1, I, 127.0.0.1	#	TrunkPeerAddress	IPAddress	group is a VoIP trunk or a group of DECT IP phones
0.9.6, E 							#	TrunkGroup	group is n analogue ports or a VoIP trunk 
# VoipGroup H323Trunks
0.10.4, E								#	VoIpGroup	Existence	group is VoIP trunk or extension group
0.10.4.0, C, 4					#	IpGroupType Enumeration	IpGroupTypeEnum	{AvayaPhones[1], OpenH323Phones[2], DectPhones[3], H323Trunk[4], SIPTrunk[5]} 
0.10.4.1, I, 127.0.0.2	#	TrunkPeerAddress	IPAddress	group is a VoIP trunk or a group of DECT IP phones
0.10.6, E 							#	TrunkGroup	group is n analogue ports or a VoIP trunk 
# VoipGroup AvayaPhones
0.11.4, E				#	VoIpGroup	Existence	group is VoIP trunk or extension group
0.11.4.0, C, 1	#	IpGroupType Enumeration	IpGroupTypeEnum	{AvayaPhones[1], OpenH323Phones[2], DectPhones[3], H323Trunk[4], SIPTrunk[5]} 
0.11.8, E				# Extension Group
# VoipGroup OpenH323Phones
0.12.4, E				#	VoIpGroup	Existence	group is VoIP trunk or extension group
0.12.4.0, C, 2	#	IpGroupType Enumeration	IpGroupTypeEnum	{AvayaPhones[1], OpenH323Phones[2], DectPhones[3], H323Trunk[4], SIPTrunk[5]} 
0.12.8, E				# Extension Group
# VoipGroup DECTEctensions
0.13.4, E				#	VoIpGroup	Existence	group is VoIP trunk or extension group
0.13.4.0, C, 3	#	IpGroupType Enumeration	IpGroupTypeEnum	{AvayaPhones[1], OpenH323Phones[2], DectPhones[3], H323Trunk[4], SIPTrunk[5]} 
0.13.8, E				# Extension Group
# Other Switch data
1, C, 44 								# TotalExtensions	Cardinal
2, C, 12 								# TotalTrunks	Cardinal
3.0, C, 12  						#	ModuleType 	ModuleTypeEnum		{IP412[12]}
3.1, C, 4  							#	FirmwareMajorVersion 	Cardinal 	Firmware versions are structured as MajorRelease.MinorRelease(BuildNumber)
3.2, C, 0  							#	FirmwareMinorVersion 	Cardinal
3.3, C, 96 							#	FirmwareBuildVersion 	Cardinal
4, S, SSA-Simulator			#	SwitchName	String	As found in Manager's System settings	
5, I, 127.0.0.1					#	SwitchAddress	IPAddress	The Switch address on LAN1	
6, E										#	SystemInfo additional description of hardware configuration
7, A, <start>						#	StartTime	AbsoluteTime	Time when the switch started up	
8, T, 0									#	SwitchUpTime	SwitchTime	Monitoring the switch object produces a 1Hz time signal and also produces notifications of config merges  [SwitchTime is elapsed time since the start time of the switch, in milliseconds]
9, T, 0									#	SwitchUpTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
10, E																	#	List of all alarms currently held in switch
10.3.2, R, sw.0.9.6.17.0.0						#	TrunkGroupAlarm	Alarm is in the trunk category
10.4.3, R, sw.0.5.10									#	LinkAlarm	Alarm is in the link category
10.5.1, R, sw.6.9.0.0									#	Object Congestion Alarm is in the service category
10.6.1, R, sw.6.7.0.0									#	Object Authentication Alarm is in the service category
10.7.1, R, sw.6.7.1.0									#	Object Authentication Alarm is in the service category
10.8.1, R, sw.6.7.2.0									#	Object Authentication Alarm is in the service category
10.9.1, R, sw.6.7.3.0									#	Object Authentication Alarm is in the service category
10.10.1, R, sw.6.7.4.0								#	Object Authentication Alarm is in the service category
10.11.1, R, sw.6.7.5.0								#	Object Authentication Alarm is in the service category
10.12.1, R, sw.6.7.6.0								#	Object Authentication Alarm is in the service category
10.13.1, R, sw.6.7.7.0								#	Object Authentication Alarm is in the service category
10.14.1, R, sw.6.7.8.0								#	Object Authentication Alarm is in the service category
10.15.1, R, sw.6.0.1.4 								# Object Resource Alarm is in the service category
10.16.1, R, sw.6.0.2.4 								# Object Resource Alarm is in the service category
10.17.1, R, sw.6.0.3.4 								# Object Resource Alarm is in the service category
10.18.1, R, sw.6.0.4.4 								# Object Resource Alarm is in the service category
10.19.1, R, sw.6.0.5.4 								# Object Resource Alarm is in the service category
10.22.2, R, sw.0.9.6.18 							# LoopbackAlarm Alarm is in the trunk category
10.23.3, R, sw.14.3 							# Feature Key Connection Failure Alarm is in the service category
10.25.1, R, sw.14.5.0.6 							# Licence oversubscribed Alarm is in the service category
10.26.1, R, sw.14.6.0.0 							# Licence unavailable Alarm is in the service category
10.27.3, R, sw.16.5                   # Voicemail Storage Alarm is in the link category
10.28.3, R, sw.16.6                   # Voicemail UpDown Alarm is in the link category
10.29.3, R, sw.0.6.8.1.1.4            # Device Change Alarm is in the link category
14, E										# LicenceInfo Link
16, E										# VoucemailInfo Link
17, C, 1 								# TerritoryVariant	TerritoryVariantEnum {ROW[1], US[2]} - indicates the flag set up during manufacture, not the locale setting
23, E										# PingResults
25, C, 3 								# LastRestartReason	RestartReasonEnum {UserInitiated[1], NewConfiguration[2], AbnormalTermination[3], NormalPowerup[4]}
26, S, Manager-0815			#	RestartedBy	Manager access ID used when commanding the restart (LastRestartReason = UserInitiated or NewConfiguration)
27, S, 0123456789ABCDEF	#	StackDump	Textual form of the crash stack dump (LastRestartReason = AbnormalTermination)
28, E	 									#	WAN3Supported	Existence	WAN3 module is supported

[sw.0.5.10]
# UpdownHistory
0, E				#	Initialising Existence
1, E				#	DownAlarm Existence
1.0, E			#	GenericInfo Existence
1.0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
1.0.1, C, 3	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
1.0.2, E		#	Current	Existence Alarm condition is still present
1.0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null

[sw.0.9.6]
# Voip Trunk Group
0, C,	11				#	TrunkNumber	Line number as used internally by IP Office (trunk is digital or VoIP trunk)
6, I, 127.0.0.1	#	TrunkPeerAddress	IP address of peer for this VoIP trunk 
7, C,	1					#	CompressionOffered	VoIPCompression Enumeration {Auto[1], 64transparent[2], G711A[3], G711Mu[4], G729A[5], G729simple[6], ADPCM32[7], ADPCM16[8], Netcoder8[9], G7231[10]}
8, E 						#	DirectMediaAllowed trunk is VoIP trunk with this config option
9, E 						#	EnableFastStart trunk is VoIP trunk with this config option
10, E 					#	SilenceSuppression trunk is VoIP trunk with this config option
11, C,	1				#	SCNStatus	SCNStatus Enumeration {NotEnabled[1],Up[2],Down[3]}
14.1, E 				#	TrunkChannel
14.2, E 				#	TrunkChannel
15, E 					#	CallsByCategory Breakdown of TotalCalls/TotalCallTime
17, E						# AlarmList 
17.0, E					# AlarmInfo
17.0.0, E				# TrunkGroupAlarm
18, 	E					# LoopbackAlarm 
[sw.0.9.6.14.1.0]
5, R, sw.19.0.1.0	#	ActiveCall	CallRef
6, C, 2						# ChannelState IdleChannelStateEnum {Normal[1], Clearing[2], OutOfService[3], BusyWrapUp[4], ConnectedWAN[5], Prealerting[6], listeningToBusy[7], listeningToDisconnected[8], listeningToNU[9]}
7, T, 20000				# IdleEntryTime SwitchTime time when ChannelState last became present or altered its value 
10, I, 143.1.10.0	#	CallPeer	the endpoint IP address across this trunk for this call
[sw.0.9.6.14.2.0]
5, R, sw.19.0.2.0	#	ActiveCall	CallRef
6, C, 3						# ChannelState IdleChannelStateEnum {Normal[1], Clearing[2], OutOfService[3], BusyWrapUp[4], ConnectedWAN[5], Prealerting[6], listeningToBusy[7], listeningToDisconnected[8], listeningToNU[9]}
7, T, 10000				# IdleEntryTime SwitchTime time when ChannelState last became present or altered its value 
10, I, 143.1.10.1	#	CallPeer	the endpoint IP address across this trunk for this call
[sw.0.9.6.15]
#CallsByCategory
0, E 						#	CallCountsInCategoriesList
0.1, E 					#	CallCountsInCategoriesEntry
0.1.0, C, 1			#	Category	CallCategoryEnumeration	{Outgoing[1], IncomingAnswered[2], IncomingAbandoned[3]}
0.1.1, C, 5			#	TotalCalls	Cardinal	total calls in category
0.1.2, C, 2000	#	TotalCallTime	ElapsedTimeInSeconds	total time on all these calls
0.2.0, C, 2			#	Category	CallCategoryEnumeration	{Outgoing[1], IncomingAnswered[2], IncomingAbandoned[3]}
0.2.1, C, 10		#	TotalCalls	Cardinal	total calls in category
0.2.2, C, 1000	#	TotalCallTime	ElapsedTimeInSeconds	total time on all these calls
0.2.3, C, 30		#	TotalRingTime	ElapsedTimeInSeconds	total ringing time on all these calls
0.3.0, C, 3			#	Category	CallCategoryEnumeration	{Outgoing[1], IncomingAnswered[2], IncomingAbandoned[3]}
0.3.1, C, 3			#	TotalCalls	Cardinal	total calls in category
0.3.3, C, 40		#	TotalRingTime	ElapsedTimeInSeconds	total ringing time on all these calls
1, T, 2000			#	CountStartTime	SwitchTime	time when all counts were initialised to zero
2, E 						#	Command	Reset counts command is possible
[sw.0.9.6.17.0.0]
# TrunkGroupAlarm
0, E				#	GenericInfo Existence
0.0, T, 0		#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 10	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.3, E			#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, C, 6			#	AlarmType	TrunkGroupAlarmType Enumeration {LOS [1], OOS[2], RedAlarm[3], BlueAlarm[4], YellowAlarm[5], IPConnectFail[6]}
[sw.0.9.6.18]
# LoopbackAlarm
0, E				#	GenericInfo Existence
0.0, T, 0		#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 5		#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E			#	Current	Existence Alarm condition is still present
0.3, E			#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, E				#	LoopbacksPresent Existence
1.1, E			#	LoopbackPresent Existence
1.1.0, C, 1	#	LoopbackType LoopbackType Enumeration {NearEndPayload[1], NearEndLine[2], NearEndInward[3], NearEndOther[4], FarEndPayload[5], FarEndLine[6]}

[sw.0.10.6]
# Voip Trunk Group
0, C,	12				#	TrunkNumber	Line number as used internally by IP Office (trunk is digital or VoIP trunk)
6, I, 127.0.0.2	#	TrunkPeerAddress	IP address of peer for this VoIP trunk 
7, C,	2					#	CompressionOffered	VoIPCompression Enumeration {Auto[1], 64transparent[2], G711A[3], G711Mu[4], G729A[5], G729simple[6], ADPCM32[7], ADPCM16[8], Netcoder8[9], G7231[10]}
11, C, 2				#	SCNStatus	SCNStatus Enumeration {NotEnabled[1],Up[2],Down[3]}
14.1, E 				#	TrunkChannel
14.2, E 				#	TrunkChannel
[sw.0.10.6.14.1.0]
6, C, 2			# ChannelState IdleChannelStateEnum {Normal[1], Clearing[2], OutOfService[3], BusyWrapUp[4], ConnectedWAN[5], Prealerting[6], listeningToBusy[7], listeningToDisconnected[8], listeningToNU[9]}
7, T, 20000	# IdleEntryTime SwitchTime time when ChannelState last became present or altered its value 
[sw.0.10.6.14.2.0]
6, C, 4			# ChannelState IdleChannelStateEnum {Normal[1], Clearing[2], OutOfService[3], BusyWrapUp[4], ConnectedWAN[5], Prealerting[6], listeningToBusy[7], listeningToDisconnected[8], listeningToNU[9]}
7, T, 30000	# IdleEntryTime SwitchTime time when ChannelState last became present or altered its value 
[sw.0.10.6.14.3.0]
6, C, 6			# ChannelState IdleChannelStateEnum {Normal[1], Clearing[2], OutOfService[3], BusyWrapUp[4], ConnectedWAN[5], Prealerting[6], listeningToBusy[7], listeningToDisconnected[8], listeningToNU[9]}
7, T, 40000	# IdleEntryTime SwitchTime time when ChannelState last became present or altered its value 

[sw.0.3.8]
# Extension Group (Expansion Module 1, DS30V1)
1.1.1, K, 101	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.2.1, K, 102	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.3.1, K, 103	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.4.1, K, 104	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.5.1, K, 105	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.6.1, K, 106	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.7.1, K, 107	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.8.1, K, 108	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.9.1, K, 109	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.10.1, K, 110	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.11.1, K, 111	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.12.1, K, 112	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.13.1, K, 113	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.14.1, K, 114	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.15.1, K, 115	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.16.1, K, 116	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.17.1, K, 117	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.18.1, K, 118	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.19.1, K, 119	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.20.1, K, 120	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.21.1, K, 121	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.22.1, K, 122	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.23.1, K, 123	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.24.1, K, 124	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.25.1, K, 125	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.26.1, K, 126	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.27.1, K, 127	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.28.1, K, 128	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.29.1, K, 129	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.30.1, K, 130	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
[sw.0.3.8.1.1.0]
# Extension 101
1, K, 101	#	UserNumber	KeypadSequence	indicates the logged-in user number	phone is connected/port is analogue and user is logged in
2, S, OneHunderdOne	# UserName String	indicates the logged-in user or NoUser	phone is connected or port is analogue
[sw.0.3.8.1.2.0]
# Extension 102
1, K, 102	#	UserNumber	KeypadSequence	indicates the logged-in user number	phone is connected/port is analogue and user is logged in
2, S, OneHunderdTwo	# UserName	String	indicates the logged-in user or NoUser	phone is connected or port is analogue
[sw.0.3.8.1.30.0]
# Extension 130
1, K, 130	#	UserNumber	KeypadSequence	indicates the logged-in user number	phone is connected/port is analogue and user is logged in
2, S, OneHunderdThirty	# UserName	String	indicates the logged-in user or NoUser	phone is connected or port is analogue

[sw.0.6.8]
# Extension Group (Basegroup DSPhones)
1.1.1, K, 601	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.2.1, K, 602	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.3.1, K, 603	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.4.1, K, 604	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.5.1, K, 605	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.6.1, K, 606	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.7.1, K, 607	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.8.1, K, 608	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
[sw.0.6.8.1.1]
1, K, 601	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
[sw.0.6.8.1.2]
1, K, 602	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
[sw.0.6.8.1.3]
1, K, 603	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
[sw.0.6.8.1.4]
1, K, 604	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
[sw.0.6.8.1.5]
1, K, 605	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
[sw.0.6.8.1.6]
1, K, 606	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
[sw.0.6.8.1.7]
1, K, 607	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
[sw.0.6.8.1.8]
1, K, 608	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
[sw.0.6.8.1.1.0]
# Extension 601
1, K, 601	#	UserNumber	KeypadSequence	indicates the logged-in user number	phone is connected/port is analogue and user is logged in
2, S, Six-O-One	# UserName String	indicates the logged-in user or NoUser	phone is connected or port is analogue
3.1.0, C, 1
3.1.1, K, 603
3.1.0, C, 2
3.1.1, K, 604
4, C, 1
5, K, 602
6, C, 2
16, C, 1 # Number of new messages
17, C, 2
[sw.0.6.8.1.1.4] # decice change alarm
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 2	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
[sw.0.6.8.1.2.0]
# Extension 602
1, K, 602	#	UserNumber	KeypadSequence	indicates the logged-in user number	phone is connected/port is analogue and user is logged in
2, S, Six-O-Two	# UserName	String	indicates the logged-in user or NoUser	phone is connected or port is analogue
4, C, 2
5, K, 601
15, C, 1
16, C, 0 # Number of new messages
17, C, 1
[sw.0.6.8.1.8.0]
# Extension 608
1, K, 608	#	UserNumber	KeypadSequence	indicates the logged-in user number	phone is connected/port is analogdSequence	indicates the default extension number for this extension	
2, S, Six-O-Eight	# UserName	String	indicates the logged-in user or NoUser	phone is connected or port is analogue
3.1.0, C, 4
3.1.1, K, 701
4, C, 3
5, K, 01771234567
[sw.0.7.8]
# Extension Group (Basegroup POTPhones)
1.1.1, K, 701	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.2.1, K, 702	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
[sw.0.7.8.1.1]
1, K, 701	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
[sw.0.7.8.1.2]
1, K, 702	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
[sw.0.7.8.1.1.0]
# Extension 701
1, K, 701	#	UserNumber	KeypadSequence	indicates the logged-in user number	phone is connected/port is analogue and user is logged in
2, S, Seven-O-One	# UserName String	indicates the logged-in user or NoUser	phone is connected or port is analogue
16, C, 2 # Number of new messages
[sw.0.7.8.1.2.0]
# Extension 702
1, K, 702	#	UserNumber	KeypadSequence	indicates the logged-in user number	phone is connected/port is analogue and user is logged in
2, S, Seven-O-Two	# UserName String	indicates the logged-in user or NoUser	phone is connected or port is analogue
3.0.0, C, 3
3.0.1, K, 701
16, C, 11 # Number of new messages

[sw.0.11.8]
# Extension Group (Avaya IP Phones)
1.1.0, E	#	Extention
1.1.1, K, 1101	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.1.2, I, 192.168.11.1	# Peer IP address
1.1.3, M, 20015998341291	# MAC address
1.2.0, E	#	Extention
1.2.1, K, 1102	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.2.2, I, 192.168.11.2	# Peer IP address
[sw.0.11.8.1.1]
0, E	#	Extention
1, K, 1101	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
2, I, 192.168.11.1	# Peer IP address
3, M, 20015998341291	# MAC address
[sw.0.11.8.1.1.0]
1, K, 1101	# User Number
2, S, Eleven-O-One	# User name
9, C, 10	# 4610
[sw.0.11.8.1.2]
0, E	#	Extention
1, K, 1102	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
2, I, 192.168.11.2	# Peer IP address
[sw.0.11.8.1.2.0]
1, K, 1102	# User Number
2, S, Eleven-O-Two	# User name
9, C, 10	# 4610

[sw.0.12.8]
# Extension Group (Open H.323 Phones)
1.0.0, E	#	Extention
1.0.1, K, 1201	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.0.2, I, 192.168.12.1	# Peer IP address
1.0.3, M, 303174162	# MAC address
[0.12.8.1.0.0]
1, K, 1201	# User Number
2, S, Twelve-O-One	# User name

[sw.0.13.8]
# Extension Group (DECT Extensions)
1.0.0, E	#	Extention
1.0.1, K, 1301	#	DefaultNumber	KeypadSequence	indicates the default extension number for this extension	
1.0.2, I, 192.168.13.1	# Peer IP address
1.0.3, M, 13	# MAC address
[sw.0.13.8.1.0.0]
1, K, 1301	# User Number
2, S, Thirty-O-One	# User name

[sw.6]
# System Info
0.1.0, C, 1		#	ResourceType	SysResourceType Enumeration	{DataChannel[1], VCMChannel[2], VMChannel[3], ModemChannel[4], ConferenceChannel[5]}	[one entry is always present for each of these resource types]
0.1.1, C, 0		#	ChannelsInstalled	Cardinal		
0.1.3, C, 0		#	ChannelsInUse	Cardinal		
0.1.4, E		#	CongestionAlarm	resource allocation has ever failed, always a historic alarm, classified as ServiceAlarm
0.1.4.0, E		#	GenericInfo Existence
0.1.4.0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1.4.0.1, C, 1	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.1.4.0.2, E		#	Current	Existence Alarm condition is still present
0.1.4.0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null

0.2.0, C, 2		#	ResourceType	SysResourceType Enumeration	{DataChannel[1], VCMChannel[2], VMChannel[3], ModemChannel[4], ConferenceChannel[5]}	[one entry is always present for each of these resource types]
0.2.1, C, 10		#	ChannelsInstalled	Cardinal		
0.2.2, C, 5		#	FirstBankSize	Cardinal	For devices of which two banks can be fitted: channels in the first bank 	two banks fitted (can only apply to VCMs and Conference devices)
0.2.3, C, 10		#	ChannelsInUse	Cardinal		
0.2.4, E		#	!a copy of this block exists below! CongestionAlarm	resource allocation has ever failed, always a historic alarm, classified as ServiceAlarm
0.2.4.0, E		#	GenericInfo Existence
0.2.4.0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.2.4.0.1, C, 2	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2.4.0.2, E		#	Current	Existence Alarm condition is still present
0.2.4.0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null

0.3.0, C, 3		#	ResourceType	SysResourceType Enumeration	{DataChannel[1], VCMChannel[2], VMChannel[3], ModemChannel[4], ConferenceChannel[5]}	[one entry is always present for each of these resource types]
0.3.1, C, 20		#	ChannelsInstalled	Cardinal		
0.3.3, C, 15		#	ChannelsInUse	Cardinal		
0.3.4, E		#	!a copy of this block exists below! CongestionAlarm	resource allocation has ever failed, always a historic alarm, classified as ServiceAlarm
0.3.4.0, E		#	GenericInfo Existence
0.3.4.0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.3.4.0.1, C, 3	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.3.4.0.2, E		#	Current	Existence Alarm condition is still present
0.3.4.0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null

0.4.0, C, 4		#	ResourceType	SysResourceType Enumeration	{DataChannel[1], VCMChannel[2], VMChannel[3], ModemChannel[4], ConferenceChannel[5]}	[one entry is always present for each of these resource types]
0.4.1, C, 8		#	ChannelsInstalled	Cardinal		
0.4.3, C, 0		#	ChannelsInUse	Cardinal		
0.4.4, E		#	!a copy of this block exists below! CongestionAlarm	resource allocation has ever failed, always a historic alarm, classified as ServiceAlarm
0.4.4.0, E		#	GenericInfo Existence
0.4.4.0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.4.4.0.1, C, 4	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.4.4.0.2, E		#	Current	Existence Alarm condition is still present
0.4.4.0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null

0.5.0, C, 5		#	ResourceType	SysResourceType Enumeration	{DataChannel[1], VCMChannel[2], VMChannel[3], ModemChannel[4], ConferenceChannel[5]}	[one entry is always present for each of these resource types]
0.5.1, C, 64		#	ChannelsInstalled	Cardinal		
0.5.2, C, 64		#	FirstBankSize	Cardinal	For devices of which two banks can be fitted: channels in the first bank 	two banks fitted (can only apply to VCMs and Conference devices)
0.5.3, C, 2		#	ChannelsInUse	Cardinal		
0.5.4, E		#	!a copy of this block exists below! CongestionAlarm	resource allocation has ever failed, always a historic alarm, classified as ServiceAlarm
0.5.4.0, E		#	GenericInfo Existence
0.5.4.0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.5.4.0.1, C, 5	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.5.4.0.2, E		#	Current	Existence Alarm condition is still present
0.5.4.0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null

1, C, 4 	#	PCMCIASlotADevice	CardEnumeration	{Empty[1], UnsupportedDevice[2], CompactFlash64M[3], WiFiAvaya11b[4]}	slot exists in the base unit
2,	 C, 1 	# PCMCIASlotBDevice	CardEnumeration	[SOE has two PCMCIA slots]	slot exists in the base unit
3,	 C, 3		# CompactFlashSlotDevice	CardEnumeration	[406v2 has one CF slot]	slot exists in the base unit
4, C, 1		#	MusicSource	InternalExternal Enumeration	{Internal[1], External[2]}	
5, C, 100		#	MaxConfigSize	Cardinal	total available space in this system for storing config file, in Kbytes	
6, C, 88	#	CurrentConfigSize	Cardinal	space used by current config file, in Kbytes	
#7	AuthenticationFailures	List		
#7.i	AuthenticationFailure	Key		
#7.i.0	AuthenticationAlarm	AuthenticationAlarmLink		
#8	DeltaServerLinkInfo	UpdownHistoryLink	classified as a linkAlarm	a delta server user and password is configured for this switch
#9	OGCongestionAlarms	List		
#9.i	OGCongestionAlarm	Key		
#9.i.0	OGCongestion	OGFullAlarmLink	indicates no free channels corresponding to an Outgoing Group were available	
#10	LostAlarm	LostAlarmObject		historic alarms have been discarded due to lack of space
11, C, 33	#	CPUusage	Cardinal	as percentage - updated every second	time to instrument this in release 4.0
12, C, 512	# MemoryFree	Cardinal	in Kbytes - updated every second	time to instrument this in release 4.0

[sw.6.0.1.4]
#Congestion alarm relating to resource type 1 DataChannel
0, E		#	GenericInfo Existence
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 1	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null

[sw.6.0.2.4]
#Congestion alarm relating to resource type 2 VCMChannel
0, E		#	GenericInfo Existence
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 2	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null

[sw.6.0.3.4]
#Congestion alarm relating to resource type 3 VMChannel
0, E		#	GenericInfo Existence
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 3	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null

[sw.6.0.4.4]
#Congestion alarm relating to resource type 4 ModemChannel
0, E		#	GenericInfo Existence
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 4	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
# 0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null

[sw.6.0.5.4]
#Congestion alarm relating to resource type 5 ConferenceChannel
0, E		#	GenericInfo Existence
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 5	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
# 0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null

[sw.6.7.0.0]
# AuthenticationAlarm #1
0, E		#	GenericInfo Existence
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 1	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, C, 1   # Connection type Manager
2, C, 1   # Failure Type
3, S, KarlNapp # User Name
4, K, 204 # User Number
5, I, 192.168.12.1	# IP address
6, S, RAS # RAS

[sw.6.7.1.0]
# AuthenticationAlarm #2
0, E		#	GenericInfo Existence
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 1	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, C, 6   # Connection type VoIP
2, C, 0   # Failure Type
3, S, Cumulus # User Name
4, K, 204 # User Number
5, I, 192.168.12.1	# IP address
6, S, RAS # RAS

[sw.6.7.2.0]
# AuthenticationAlarm #3
0, E		#	GenericInfo Existence
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 1	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, C, 2   # Connection type Monitor
2, C, 0   # Failure Type
3, S, Cumulus # User Name
4, K, 204 # User Number
5, I, 192.168.12.1	# IP address
6, S, RAS # RAS

[sw.6.7.3.0]
# AuthenticationAlarm #4
0, E		#	GenericInfo Existence
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 1	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, C, 3   # Connection type SSA
2, C, 0   # Failure Type
3, S, Cumulus # User Name
4, K, 204 # User Number
5, I, 192.168.12.1	# IP address
6, S, RAS # RAS

[sw.6.7.4.0]
# AuthenticationAlarm #5
0, E		#	GenericInfo Existence
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 1	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, C, 4   # Connection type RAS
2, C, 0   # Failure Type
3, S, Cumulus # User Name
4, K, 204 # User Number
5, I, 192.168.12.1	# IP address
6, S, RAS # RAS

[sw.6.7.5.0]
# AuthenticationAlarm #6
0, E		#	GenericInfo Existence
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 1	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, C, 5   # Connection type VM
2, C, 0   # Failure Type
3, S, Cumulus # User Name
4, K, 204 # User Number
5, I, 192.168.12.1	# IP address
6, S, RAS # RAS

[sw.6.7.6.0]
# AuthenticationAlarm #7
0, E		#	GenericInfo Existence
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 1	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, C, 7   # Connection type SNMP
2, C, 0   # Failure Type
3, S, Cumulus # User Name
4, K, 204 # User Number
5, I, 192.168.12.1	# IP address
6, S, RAS # RAS

[sw.6.7.7.0]
# AuthenticationAlarm #8
0, E		#	GenericInfo Existence
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 1	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, C, 9   # Connection type DeltaServer
2, C, 0   # Failure Type
3, S, Cumulus # User Name
4, K, 204 # User Number
5, I, 192.168.12.1	# IP address
6, S, RAS # RAS

[sw.6.7.8.0]
# AuthenticationAlarm #9
0, E		#	GenericInfo Existence
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 1	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, C, 10   # Connection type VMSystem
2, C, 0   # Failure Type
3, S, Cumulus # User Name
4, K, 204 # User Number
5, I, 192.168.12.1	# IP address
6, S, RAS # RAS

[sw.6.9.0.0]
# CongestionAlarm #1
0, E		#	GenericInfo Existence
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 1	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
# 0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, C, 30 # OCR number

[sw.14]
#LicenceInfo
0, C, 1		# FeatureKeyNumber
1, C, 2		# FeatureKeyServerType "Invalid", "PC", "LocalDongle"
2, I, 192.168.12.1	# IP address
# FKSlinkInfo
3.0, E		# UpDownHistory
3.1, E			# Initialising
3.1.0, E	# DownAlarm
3.1.0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
3.1.0.1, C, 1	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
3.1.0.2, E		#	Current	Existence Alarm condition is still present
3.1.0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
4, T, 0   # LastPolledTime
5, E			# LicenceList (copy below !)
5.0.0, S, abcdefghi0123456789abcdefghi01	# 32 character licence string
5.0.1, C, 4	#	Licence Type Enumeration CCCEmail[4] 
5.0.2, C, 1 # Licence Status Enumeration Valid[1]
5.0.3, A, <start> # Expiry
5.0.4, C, 0 # InstancesLicensed
5.0.5, C, 0 # InstancesInUse
5.0.6, E    # LicenceOversubscribed Alarm
6.0.0, E    # GenLicenceAlarm
7, E	# PingFKS

[sw.14.3]
# FKSlinkInfo
0, E		# UpDownHistory
1, E			# Initialising
1.0, E	# DownAlarm
1.0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
1.0.1, C, 1	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
1.0.2, E		#	Current	Existence Alarm condition is still present
1.0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null

[sw.14.5.0]
# Licence list
0, S, abcdefghi0123456789abcdefghi01	# 32 character licence string
1, C, 4	#	Licence Type Enumeration CCCEmail[4] 
2, C, 1 # Licence Status Enumeration Valid[1]
3, A, <start> # Expiry
4, C, 0 # InstancesLicensed
5, C, 0 # InstancesInUse
6, E    # LicenceOversubscribed Alarm

[sw.14.5.0.6]
# LicenceOversubscribed Alarm (valid licence alarm)
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 284	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null

[sw.14.6.0.0]
# Licence not available Alarm
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 15	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, C, 7	#	Licence Type Enumeration CCC_WALL_BOARD[7]

[sw.16.5]
# Voicemail Storage Alarm
0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
0.1, C, 3	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
0.2, E		#	Current	Existence Alarm condition is still present
0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null
1, C, 2	#	StorageStatus Enumeration StorageNearlyFull[2]

[sw.16.6]
# Voicemail UpDown
0, E		# UpDownHistory
1, E			# Initialising
1.0, E	# DownAlarm
1.0.0, T, 0	#	LastOccurrenceTime	SwitchTime	Last time when the configuration is changed (e.g. by Manager)
1.0.1, C, 1	#	NumberOfOccurrences	Cardinal If the same alarm occurs more than one time, the LastOccurrenceTime is updated and this field is incremented
1.0.2, E		#	Current	Existence Alarm condition is still present
1.0.3, E		#	DeleteAlarm	Command	Alarm Deletes the parent object containing this GenericAlarmInfo object; ReturnValues is Null

[sw.19.0.1.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0.0, C, 1		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
0.1, E		#	TrunkList	List	list of 1 or more Trunk entries, allowing SCN (paging calls and) group rings to be represented  max 1 entry for IEnd	
0.1.2.0, R, sw.0.9.6.14.1.0	#	TrunkChannel	FieldIdentifier	identifies the {trunk, channel}, or trunk only for held-at-CO calls	EndType = Trunk, Paging or TargetList
0.1.2.1.0, C, 10	#	RoundTripDelay	round trip delay as defined in RFC 1889, in microseconds
0.1.2.1.1, C, 20	#	ReceiveJitter	jitter as defined in RFC 1889, in microseconds
0.1.2.1.2, C, 30	#	ReceivePacketLoss	Fraction	as defined in RFC1889, expressed as a fraction in ten-thousandths
0.1.2.1.3, C, 40	#	TransmitJitter	jitter as defined in RFC 1889, in microseconds
0.1.2.1.4, C, 50	#	TransmitPacketLoss	Fraction	as defined in RFC1889, expressed as a fraction in ten-thousandths
#ce.1.i.1	QoS	RTPQoSObject	provides jitter / round trip / packet loss information	this trunk is a VoIP trunk and call is using a VCM for this end
0.8, C, 16		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
0.9, C, 1	#	CodecSetting	VoIPCompression Enumeration	{Auto[1], 64transparent[2], G711A[3], G711Mu[4], G729A[5], G729simple[6], ADPCM32[7], ADPCM16[8], Netcoder8[9], G7231[10]}	call is in connected state; End is VoIP [Auto not applicable for this field]
0.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
1, E	# Rend	CallEndObject	REnd is a normally the recipient of the call; the REnd may describe multiple endpoints, e.g. in the case of a group ring call  
1.0, C, 8		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
1.2, E	#	UserList	List	list of 1 or more User entries, allowing paging calls, group rings to be represented  max 1 entry for IEnd	EndType = User, VoiceMailBox, Paging or TargetList
1.2.0.0, K, 701	#	UserNumber	KeypadSequence	identifies a user or group by number	Party/target is User, Queue or VoiceMailBox (may be a group in the case of VoiceMailBox or Queue)
1.2.0.1, S, Seven-O-One	#	UserName	String	identifies a user or group by name	
1.2.1.0, K, 601	#	UserNumber	KeypadSequence	identifies a user or group by number	Party/target is User, Queue or VoiceMailBox (may be a group in the case of VoiceMailBox or Queue)
1.2.1.1, S, Six-O-One	#	UserName	String	identifies a user or group by name	
1.2.1.2, C, 1		#	Button	Cardinal	each call on a multi-line set must be associated with a button; button numbering will match phone set/manager documentation	Party/target is a User whose extension is a multi-line set
1.2.1.3, C, 1		#	ButtonType	KLPButtonType Enumeration	{CA[1], LA[2], BA[3], CC[4]}	
1.2.2.0, K, 1101	#	UserNumber	KeypadSequence	identifies a user or group by number	Party/target is User, Queue or VoiceMailBox (may be a group in the case of VoiceMailBox or Queue)
1.8, C, 8		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
1.9, C, 2	#	CodecSetting	VoIPCompression Enumeration	{Auto[1], 64transparent[2], G711A[3], G711Mu[4], G729A[5], G729simple[6], ADPCM32[7], ADPCM16[8], Netcoder8[9], G7231[10]}	call is in connected state; End is VoIP [Auto not applicable for this field]
1.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
#2	RTPConnectionType	RTPConnectionType Enumeration	{DirectMedia[1], RTPRelay[2], VCMs[3]}
#3	NumberDialled	KeypadSequence	The sequence of digits dialled on the extension
4, K, 200		# DDI	KeypadSequence	[aka DID or MSN] The called number presented for a call originating from a trunk
5, K, 0815		#	CallerID	KeypadSequence	The calling party number presented with a call originating from a trunk
#6, S, "Caller 1"		#	CallerName	String	The calling party name presented with a call originating from a trunk
#7, K, 2222	#	ConnectedID	KeypadSequence	The connected party number reported by a trunk for an outgoing connected call
9, E	#	CallRoutingInfo	CallRoutingInfoLink	More details on the history of this call
#ca.10	CallSupplementaryInfo	CallSupplInfoLink	Supplementary information for Devlink
#ca.11	CallRecording	Existence	
#ca.12	Trace	TraceEventLink	Provides events relating to this call and its parties
13, C, 11		#	Call ID	Cardinal	Unique CM number for this call
#ca.14	OriginalCallID	Cardinal	Original Call ID associated with the call object
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 
#ca.16	ClearCall	Command	Clears call, plus associated calls in the case of a conference that is not of type Power Conference; ReturnValues is Null
[sw.19.0.1.0.9]
2, S, Main	# FirstGroupTarget

[sw.19.0.2.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0.0, C, 2		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
0.2.0.0, K, 702	#	UserNumber	KeypadSequence	identifies a user or group by number	Party/target is User, Queue or VoiceMailBox (may be a group in the case of VoiceMailBox or Queue)
0.2.0.1, S, Seven-O-Two	#	UserName	String	identifies a user or group by name	
0.8, C, 16		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
0.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
1, E	# Rend	CallEndObject	REnd is a normally the recipient of the call; the REnd may describe multiple endpoints, e.g. in the case of a group ring call  
1.0, C, 8		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
1.1.1.0, R, sw.0.9.6.14.2.0	#	TrunkChannel	FieldIdentifier	identifies the {trunk, channel}, or trunk only for held-at-CO calls	EndType = Trunk, Paging or TargetList
1.8, C, 8		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
1.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
9, E	# CallRoutingInfo
13, C, 102		#	Call ID	Cardinal	Unique CM number for this call
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 
[sw.19.0.2.0.9]
4, C, 5	# FirstShortCodeSource
5, S, 6N	# FirstShortCodeMatched
6, C, 39	# FirstShortCodeFeature
7, C, 7	# FirstShortCodeOGG
15, C, 0	# RetargettingCount

[sw.19.0.3.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0.0, C, 2		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
0.2.0.0, K, 602	# User Number
0.2.0.1, S, Six-O-Two	# User Name
0.8, C, 2		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
0.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
1, E
1.0, C, 6	# ParkSlot
1.6, S, 602
1.8, C, 2
1.10, T, 0
13, C, 103		#	Call ID	Cardinal	Unique CM number for this call
14, C, 13		#	OriginalCallID	Cardinal	Original Call ID associated with the call object
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 

[sw.19.0.4.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0.0, C, 2		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
0.2.0.0, K, 101	# User Number
0.8, C, 2		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
0.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
1, E
1.0, C, 7
1.7, R, sw.21.0.0		# Conference Id
1.8, C, 2
1.10, T, 0
13, C, 104		#	Call ID	Cardinal	Unique CM number for this call
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 

[sw.19.0.5.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0.0, C, 2		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
0.2.0.0, K, 102	# User Number
0.2.0.1, S, OneHundertTwo	# User Number
0.8, C, 2		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
0.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
1, E
1.0, C, 7
1.7, R, sw.21.0.0		# Conference Id
1.8, C, 2
1.10, T, 0
11, E		# Call Recording
13, C, 105		#	Call ID	Cardinal	Unique CM number for this call
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 

[sw.19.0.6.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0.0, C, 7
0.7, R, sw.21.0.0		# Conference Id
0.8, C, 2
0.10, T, 0
1, E
1.0, C, 2		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
1.2.0.0, K, 130	# User Number
1.2.0.1, S, OneHundertThirty	# User Number
1.8, C, 2		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
1.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
13, C, 106		#	Call ID	Cardinal	Unique CM number for this call
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 

[sw.19.0.7.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0.0, C, 3
0.3, S, dialout
0.8, C, 9
0.10, T, 0
13, C, 107		#	Call ID	Cardinal	Unique CM number for this call
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 

[sw.19.0.8.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0.0, C, 2		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
0.2.0.0, K, 103	# User Number
0.8, C, 2		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
0.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
1, E
1.0, C, 4
1.5, S, 603
1.8, C, 2
1.10, T, 0
13, C, 108		#	Call ID	Cardinal	Unique CM number for this call
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 

[sw.19.0.9.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0.0, C, 2		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
0.2.0.0, K, 104	# User Number
0.8, C, 2		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
0.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
1, E
1.0, C, 5 # VoiceMailBox
1.2.0.0, K, 101	# User Number
1.2.0.1, S, OneHundertOne	# User Number
1.8, C, 2
1.10, T, 0
13, C, 109		#	Call ID	Cardinal	Unique CM number for this call
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 

[sw.19.0.10.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0.0, C, 2		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
0.2.0.0, K, 105	# User Number
0.8, C, 2		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
0.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
1, E
1.0, C, 10
1.4, S, blabla
1.8, C, 2
1.10, T, 0
13, C, 110		#	Call ID	Cardinal	Unique CM number for this call
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 

[sw.19.0.11.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0.0, C, 2		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
0.2.0.0, K, 106	# User Number
0.8, C, 2		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
0.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
1, E
1.0, C, 11
1.2.0.0, K, 200	# User Number
1.2.0.1, S, Main	
1.8, C, 18
1.10, T, 0
13, C, 111		#	Call ID	Cardinal	Unique CM number for this call
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 

[sw.19.0.12.0]
0, E	#	IEnd	CallEndObject	IEnd is normally the party that initiated the call.
0.0, C, 2		#	EndType	CallPartyType Enumeration	{Trunk[1], User[2], Data[3], VoiceMailCallFlow[4], VoiceMailBox[5], ParkSlot[6], Conference[7], TargetList[8], Paging[9], AutoAttendant[10], Queue[11]}	[target list, autoattendant, queue and paging not used for IEnd] [for the Rend, if EndState = alerting, EndType will be TargetList and may have multiple recipients]
0.2.0.0, K, 107	# User Number
0.8, C, 2		# 	EndState	CallPartyState Enumeration	{holding[1], connected[2], held[3], heldForTransfer[4], heldForConference[5], heldAtCO[6], holdReminder[7], alerting[8], seized[9], dialling[10], parkReminder[11], transferReturn[12], listeningToBusy[13], listeningToNU[14], listeningToDisconnected[15], ringback[16], parked[17], queueing[18], clearing[19], externalRerouting[20], callListen[21]} 	[alerting unlikely at IEnd][seized means ready for dialling but no digits yet dialled][queueing means waiting for free member of hunt group, while alerting means ringing at phone(s)][Holding means other end is in any heldxxx state, parked indicate that the other end is a park slot][one of Istate or Rstate must be set to clearing or externalRerouting before the call is deleted, to indicate what caused clearing]  
0.10, T, 0	#	EndModificationTime	SwitchTime	time at which any fields in this object last changed, excluding QoS and Codec settings	
1, E
1.0, C, 9
1.2.0.0, K, 110	# User Number
1.2.1.0, K, 111	# User Number
1.2.2.0, K, 112	# User Number
1.8, C, 2
1.10, T, 0
13, C, 112		#	Call ID	Cardinal	Unique CM number for this call
15,	T, 0		# CallCreationTime	SwitchTime	time when the call came into existence 

[sw.20]
0.0.0, R, sw.19.0.1.0		# Hence the type of this field is CallRef
0.1.0, R, sw.19.0.2.0		# Hence the type of this field is CallRef
0.2.0, R, sw.19.0.3.0		# Hence the type of this field is CallRef
0.3.0, R, sw.19.0.4.0		# Hence the type of this field is CallRef
0.4.0, R, sw.19.0.5.0		# Hence the type of this field is CallRef
0.5.0, R, sw.19.0.6.0		# Hence the type of this field is CallRef
0.6.0, R, sw.19.0.7.0		# Hence the type of this field is CallRef
0.7.0, R, sw.19.0.8.0		# Hence the type of this field is CallRef
0.8.0, R, sw.19.0.9.0		# Hence the type of this field is CallRef
0.9.0, R, sw.19.0.10.0		# Hence the type of this field is CallRef
0.10.0, R, sw.19.0.11.0		# Hence the type of this field is CallRef
0.11.0, R, sw.19.0.12.0		# Hence the type of this field is CallRef

[sw.21]
0.0.0, S, 100		# Conference name
0.0.1, E

[sw.21.0.0.1]
0, C, 1		# Conference type MeetMe[1]
1.0.0, R, sw.19.0.4.0
1.1.0, R, sw.19.0.5.0
