Blacklisted Extensions

Top   Previous   Next

This menu displays extensions that have attempted to register using the wrong password. Eventually the extension becomes blocked after 5 failed registration attempts within a 10 minute period. Whilst blocked, further registration attempts are ignored even if they use the correct password. This menu is supported from Release 10.1.

The default blocking time is 10 minutes. However, for non-Avaya phones, if the extension continues to attempt to register during this period its blocking time is extended.

When an extension becomes blocked the system also generates an alarm in System Status and adds an entry to its audit log. A system alarm is also generated and can be output using any of the configurable system alarm routes (SMTP, SNMP, Syslog).

Note that the IP address of a phone attempting to register can also become blocked, see Blacklisted Addresses . A phone may also be blocked from registering if it has become quarantined .

blacklist

Columns:

  • Extension Number:
    The extension number.
  • Blocked:
    Indicates whether the extension is now blocked from registering after exceeding the number of failed registration attempts.
  • Avaya Phone:
    Indicates whether the extension is recognized as being an Avaya phone.
  • Failure Count:
    The number of registration attempt failures.
  • Maximum Failure Count:
    The number of registration failures at which the extensions will become/became blocked.
  • Last Failure Time:
    The date and time of the last failed registration attempt.
  • Time To Remove :
    The date and time at which the extension, if not blocked, will be removed from the blacklist if there are no further failed registration attempts.
  • Time To Unblock:
    The date and time at which the blocked extension will be unblocked and removed from the blacklist. For non-Avaya phones this will extend if the extension attempts to re-register again before this time.

Buttons

  • Print...
    Prints all information available in the current screen (including any information currently scrolled off).
  • Refresh
    Updates the screen. This button appears on screens that do not update automatically.
  • Remove
    Remove the currently selected entry from the blacklist. This removes any blocking currently applied to that entry.
  • Remove All
    Remove all the current entries from the blacklist. This removes any blocking currently applied to those entries.
  • Save As...
    Saves the information shown on the screen to a text file (TXT or CSV). You can only save trace screens as CSV text files.

 

 

© 2017 AVAYA
15-601758 Issue 12.a.-
06:56, 21 April 2017
(blacklisted_extensions.htm)
Last Modified: 11/04/2017