## Hardcoded E129 configuration parameters
## ********************************************************************************
## * ATTENTION!!!                                                                 * 
## * TWO PLACES IN THE NEXT THREE LINES: COMMENTED FW NAME AND FIRMWARE FILE      *
## * PREFIX PARAMETER HAVE TO BE MODIFIED FOR THE FW TO BE PROPERLY UPDATED.      *
## * The comment specifies the full fw fileneme and is used in                    *
## * memorycard_filetransfer.cpp to determine which files are required by the IPO *
## * during an upgrade.                                                           *
## ********************************************************************************
<!-- Firmware File Prefix -->
<!-- <P232>e129_1.25.2.26</P232> -->

<!-- Firmware Upgrade and Provisioning -->
<!-- 0 - Always Check For New Firmware -->
<!-- 1 - Check New Fw only when pre/suffix changes -->
<!-- 2 - Always Skip the Firmware Check -->
<P238>2</P238>

## Phone Debug This should be commented out before submission
## Only used for debugging.
## Sys log server
## <P207>192.168.42.254</P207>
## Log Level 0 - NONE, 1 - DEBUG, 2 - INFO, 3 - WARNING, 4 - ERROR
## <P208>1</P208>
## SIP Logs 1 - Send SIP log in Syslog if configured and set to DEBUG level
## <P1387>1</P1387>

<!-- Subscribe to MWI. 0 - No, 1 - Yes. -->
<P99>1</P99>

<!-- SUBSCRIBE for Registration. 0 - No, 1 - Yes. Default is 0 -->
<P2319>0</P2319>

<!-- The Dial plan set to forward all input to IPO -->
<P290>{[0-9*#]+}</P290>

## Enable Call Features. 0 - No, 1 - Yes. Default was changed for e129 to 0.
## <P191>0</P191>

<!-- Allow Auto Answer by Call-Info. 0 - No, 1 - Yes. -->
<P298>1</P298>

<!-- Use # as Dial Key. 0 - No, 1 - Yes. -->
<P72>0</P72>

<!-- Enable Auto-attended Transfer by default -->
<P1376>1</P1376>

<!-- Phonebook - Remove Manually-edited entries on Download. 0 - No, 1 - Yes. Default is 1 -->
<P333>0</P333>

<!-- Enable Special Feature (Under Advanced Features) to Broadsoft to support hold event. 100 - Standard (default), 102 - Broadsoft -->
<P198>102</P198>
